CRIO switches
 

we have been troubleshooting the CRIO and would like to know what the normal operating settings are for it (the switches on the front)

thanks much
-Newman

Re: CRIO switches
 

You can't go wrong if you turn them all off.

The position of this one doesn't matter:

• USER1

If you are not using the serial port for CAN, then this doesn't matter:

• CONSOLE OUT

All the others must be off for normal operation.
You may have occasion at times to use them under special circumstances, but even then you'll turn them on only momentarily and never leave them on during normal operation.