Chief Delphi - Minibot Deployment

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)

- - Minibot Deployment (http://www.chiefdelphi.com/forums/showthread.php?t=90238)

leobot_792

27-01-2011 09:43

Minibot Deployment

Alright, so we have been brainstroming on the actrual minibot deployment method for a couple of hours now. We have several "good" ideas, however, none seems to have it all. I understand that there's usually a trade-off, but not a single design pops out. any ideas? :ahh:

Bernoulli

27-01-2011 11:41

Re: Minibot Deployment

in reality several teams are just gonna keep it simple using just drawer slides to push it out because its not so much of the deployment that matters but the speed of the minibot to reach the top =]

rutzman

27-01-2011 11:51

Re: Minibot Deployment

Quote:

Originally Posted by Bernoulli (Post 1009674)

in reality several teams are just gonna keep it simple using just drawer slides to push it out because its not so much of the deployment that matters but the speed of the minibot to reach the top =]

I disagree. If you have 4 minibots on the field that have similar speeds, deployment could very well make the difference.

JamesCH95

27-01-2011 11:56

Re: Minibot Deployment

Quote:

Originally Posted by Bernoulli (Post 1009674)

in reality several teams are just gonna keep it simple using just drawer slides to push it out because its not so much of the deployment that matters but the speed of the minibot to reach the top =]

Every minibot has the same motors and power source, if properly designed many minibots will have very similar climb times.

OP:

Our team has been brain-storming too, I think one of the fastest ways is with a piston to push the minibot out. The trick is releasing it from the piston, which we haven't figured out yet :ahh:

ESPbomb

27-01-2011 12:26

Re: Minibot Deployment

Quote:

Originally Posted by rutzman (Post 1009682)

I disagree. If you have 4 minibots on the field that have similar speeds, deployment could very well make the difference.

I very much agree. Minibots power sources are all the same, deployment is where the game will be lost or won.
ESP

leobot_792

27-01-2011 12:48

Re: Minibot Deployment

Quote:

Originally Posted by ESPbomb (Post 1009704)

I very much agree. Minibots power sources are all the same, deployment is where the game will be lost or won.
ESP

I agree that deployment matters, however who said that we will all have the same power source? who said we have to use a motor at all? there are many ways to make something move mechanically, you just got to find them and apply them. ;)

Jon Stratis

27-01-2011 12:55

Re: Minibot Deployment

Quote:

Originally Posted by leobot_792 (Post 1009721)

The GDC did.

Quote:

<G19> MINIBOTS must remain completely autonomous and move up the POST solely through electric energy provided after DEPLOYMENT by the permitted, unaltered battery and converted to mechanical energy by the permitted unaltered motors (and associated, appropriate circuitry).

JamesCH95

27-01-2011 12:59

Re: Minibot Deployment

I said that we all have the same power source and motor(s). Eagle covered it.

leobot_792

27-01-2011 22:25

Re: Minibot Deployment

<G19> has drastically changed some things. Deployment will give the advantage. Also the mass and friction against surface area will have to be at perfect set amounts to achieve the fastest minibot. back to the drawing board. ::rtm::

liam.larkin

27-01-2011 22:28

Re: Minibot Deployment

I see a lot of people saying G19 has changed a bunch. What has changed I mean they have clarified a bit. I think a combo of accuracy and speed and you will be fine. NO??

leobot_792

27-01-2011 22:30

Re: Minibot Deployment

yeah the world will continue to rotate... :D

All times are GMT -5. The time now is 20:41.