Problem running code (LabVIEW)
 

I have created code that should do mecanum drive and have code for 3 LED's using spikes. I'll try to post some print screens when i get a chance. When I go to the robot main.vi and look at the error list, there are no red flags there. I simply click run from the robot main.vi and it says it deploys successfully.
Then I can get a live camera feed from the robot to the driverstation, but i get a ton of repeated error messages. I believe these are the only errors, just repeated very frequently!:
ERROR <Code> -44006 occurred at DriverStationEnhanced IO.lvlib:Access Raw Cypress outputs.vi>>DriverStation.lvlib:Start Communication.vi>>Robot Main.vi
ERROR <Code> -44003 occurred at Camera.lvlib:Issue HTTP Request with Authentication.vi>>Camera.lvlib:Issue Get.vi>>Camera.lvlib:Set Image Appearance Property.vi>>Camera.lvlib:Set Enum Appearance Property.vi>>Camera.lvlib:Set Image Size.vi>>Begin.vi>>Robot Main.vi
ERROR <Code> -44003 occurred at Camera.lvlib:Issue HTTP Request with Authentication.vi>>Camera.lvlib:Read JPG.vi>>Camera.lvlib:Acquire Image.vi


http://www.mediafire.com/file/7cbu4v.../WPI_Error.txt

Re: Problem running code (LabVIEW)
 

The -44006 probably just means the Cypress I/O card isn't plugged in.

Re: Problem running code (LabVIEW)
 

What is the Cypress I/O card? Is that one of the ones that goes into the cRIO?

Re: Problem running code (LabVIEW)
 

It's optional for custom buttons and other controls. It connects to the Classmate. It came in a white hard plastic case the size of a double DVD case.
Your team would have gotten it in last year's Kit.

There's nothing wrong with not having it, if you're not using it. We just get a message that it isn't there because the Driver Station looks for it.

Re: Problem running code (LabVIEW)
 

Thank you for your quick replies. I did get it working. It was a fail on my part. I had not yet re-imaged the cRIO this year. After doing that everything worked just fine.

Thanks!

Re: Problem running code (LabVIEW)
 

I'll have to remember those symptoms...

Thanks

Re: Problem running code (LabVIEW)
 

This is good to hear, since I thought we had fixed this error. There shouldn't be an error just because the optional board isn't plugged into the classmate.