Chief Delphi - Bumpers

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - Bumpers (http://www.chiefdelphi.com/forums/showthread.php?t=90446)

isaac77

29-01-2011 17:04

Bumpers

Does anybody know if at competition they are going to measure the robot with and without the bumpers? or just with them? can anybody tell us the dimensions that are required once it has the bumpers installed?

ATannahill

29-01-2011 17:13

Re: Bumpers

::rtm:: ::rtm:: ::rtm:: ::rtm:: and one more thing, uhhhhh, oh yes ::rtm::

From my experience, during inspection you put your robot into a box with inner dimensions of 28x38x60 inches. The bumpers will be inspected but the size of the robot with them will not be measured. YMMV.

RoboDawg

29-01-2011 17:20

Re: Bumpers

The robot is measured and weighed without the bumpers installed. The bumpers are weighed and then inspected off and then on the robot. If you build the bumpers to the spec's in the rules you will be alright:] .

nighterfighter

29-01-2011 21:07

Re: Bumpers

Why is this in the programming section? :confused:

GaryVoshol

29-01-2011 21:14

Re: Bumpers

Quote:

Originally Posted by nighterfighter (Post 1011400)

Why is this in the programming section? :confused:

It isn't anymore.

All times are GMT -5. The time now is 07:01.