Chief Delphi - AxisCamera Programming

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- C/C++ (http://www.chiefdelphi.com/forums/forumdisplay.php?f=183)

- - AxisCamera Programming (http://www.chiefdelphi.com/forums/showthread.php?t=90484)

AxisCamera Programming

We were planning to program the axis camera to track the tape for our scoring device. We were planning to program it to use the image of the 9 pegs and track it with the image tracker. But with limitations in our budget, we weren't able to produce a full scaled, peg grid.

tl;dr: Is anybody willing to take a picture of their full scale 9-peg grid and supply the image to us?

Re: AxisCamera Programming

There are a few images in the white paper on the NI site http://decibel.ni.com/content/commun...#/?tagSet=1001. It is in the lower right corner.

Greg McKaskle

Re: AxisCamera Programming

Sorry, but I'm not following you. The far right hand corner you are talking about, how does it look like? Which words can i type into ctrl+f that would take me to the location?

Re: AxisCamera Programming

Quote:

Originally Posted by Greg McKaskle (Post 1011579)

http://decibel.ni.com/content/commun...#/?tagSet=1001

I believe this is the incorrect URL.

Quote:

Originally Posted by Lawlhwut (Post 1014629)

Sorry, but I'm not following you. The far right hand corner you are talking about, how does it look like? Which words can i type into ctrl+f that would take me to the location?

While not a whitepaper with the peg board, you should find this document very useful. http://decibel.ni.com/content/docs/DOC-14726.

If you cannot get a scoring board due to budget, make sure you allot some time on the practice field to tune your program or even better - find a local team.