eStop Robotics CCI board
 

This year our team wants to make a custom UI so we bought the eStop Robotics CCI board. we have watched the tutorial video on the web. but whenever we plug it into any of our laptops or classmates it gets recognized for like less than a second and then sits there and does nothing... What are we doing wrong? and any help would totally make my day lol. please and thank you.

Re: eStop Robotics CCI board
 

It might be perfectly appropriate that it "does nothing". What are you expecting it to do instead, and how are you trying to make it do that?

Re: eStop Robotics CCI board
 

supposedly when you plug it into the laptop using the usb cable provided it is supposed to appear in the FRC driver station as eStop Robotics HID but it does not. sry if i come off as dumb

This is the provided video and we do what it says but to no avail
http://www.youtube.com/watch?v=DxVBB...layer_embedded

Re: eStop Robotics CCI board
 

Let's try to narrow down where the problem is.

Is the CCI working properly? Try plugging it into another computer. See if it shows up as a game controller.

Is the Classmate's USB port working properly? Try plugging in a joystick. See if it shows up in the Driver Station device list. Then try the CCI in the Classmate's other port.

Re: eStop Robotics CCI board
 

Check to see if it installed properly.
Windows 7 may not have located the proper driver for it.

1. Go to Start -> Devices & printers
2. See if the eStop device is listed (any warning signs?)
3. Double-click on the eStop device icon to open a pop-up
4. On the pop-up go to the Hardware tab
5. What does it say for Device Status?

Re: eStop Robotics CCI board
 

when we plug it in it does not show up as a joystick/game controller. we have tried both usb ports and both are working perfectly well. we have also tried it on multiple computers with the same result.



it says that it is installed to the latest driver.

Re: eStop Robotics CCI board
 

Our CCI is also not showing up on the drivers station. In the device manager it says "This device cannot start (Code 10)".

Has anyone gotten their CCI to work?

Re: eStop Robotics CCI board
 

I have one and it works under XP, but I haven't had a chance to test it on Win7 and/or a Classmate yet.

Re: eStop Robotics CCI board
 

I just checked ours on XP but, alas, the same result...Code 10.

Re: eStop Robotics CCI board
 

Just tried it on two 2010 Classmates/Win7 and got Code 10 on both of them.
So a bad automatic choice of device drivers.

Connecting to the Internet didn't seem to help windows find a better driver for it.

I also immediately got distracted when one of the Classmates power failed...

Re: eStop Robotics CCI board
 

I just heard from eStop's tech support. eStop has confirmed there's a problem with at least some of the boards and they are working with Microsoft and Microchip to figure out a solution. Those who purchased a CCI are supposed to be getting an email shortly. If they can't fix it they'll be recalling the boards.

Re: eStop Robotics CCI board
 

We have a CCI at our shop and are running Windows 7. I'll speak with our programmer and see if ours is having the same issues.

Sounds like E-Stop has some good Tech Support. :D

Re: eStop Robotics CCI board
 

eStop has solved the CCI problem but it requires the CCI be updated. New orders from eStop claim to have this bug fix incorporated. Here's is what was sent to eStop customers who purchased a CCI:
-----------------
Dear Valued Customer:

eStop Robotics is pleased to let you know that we have resolved the Custom Controls Interface (CCI) connectivity issue with Windows 7.

It was necessary to update the Microchip PIC® MCU on the CCI to correct the Windows 7 connectivity issue, therefore, we need to replace the CCI that you currently have.

Replacement Procedure:
eStop Robotics will replace the CCI that you originally purchased with a new CCI that includes the updated code.

eStop Robotics will pay the shipping costs for US Postal Priority mail service to your original shipping address.

Re: eStop Robotics CCI board
 

Thanks Dale.

I don't seem to be a valued customer, so I wouldn't have known if you hadn't posted.
Messages from eStop probably got lost. I need to check my junk/spam folders.
I'll get in touch with eStop.

Re: eStop Robotics CCI board
 

eStop Robotics has processed all the requests we have received for CCI replacements.

All of the currently shipping Custom Control Interface boards are the updated versions of the CCI and have been fully tested for use in both Windows XP and Windows 7 environments.

All of our customers that received early versions of the CCI were sent an email explaining how to receive an updated CCI at no charge.

As Mark point out below, it is possible that our email message to some customers may have made its way to a junk/spam folder.

Any customer that has an early version of the Custom Control Interface should contact us immediately for a free replacement.

We want all of our customers to know that customer satisfaction is VERY important to us.