Chief Delphi - Voltage Problem on DS

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Voltage Problem on DS (http://www.chiefdelphi.com/forums/showthread.php?t=90587)

2bkrul

31-01-2011 11:10

Voltage Problem on DS

For some odd reason, when we run the robot, the voltage shows up 00.00 on the Drivers station...anybody know what could be the problem?

Mark McLeod

31-01-2011 11:20

Re: Voltage Problem on DS

The voltage readout on the Driver Station comes from the cRIO Analog Breakout in the first slot.
The Breakout voltage feedback requires a jumper on the outer two pins on the end of the board.

This by-the-way borrows Analog input 8, so don't try using that for yourself.

All times are GMT -5. The time now is 21:28.