Chief Delphi - Shrink Tubing on Minibot...

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Shrink Tubing on Minibot... (http://www.chiefdelphi.com/forums/showthread.php?t=90643)

Matt Daioh

31-01-2011 19:58

Shrink Tubing on Minibot...

I'm from a rookie team, and I was wondering about the rules regarding shrink tubing on the minibot. It says in the manual that you can use shrink tubing, but do you have to use for the intended purposes?

We want to use some as a film due to it's low coefficient of friction, but are unsure if this is legal.:confused:

Thanks:D

Vikesrock

31-01-2011 20:08

Re: Shrink Tubing on Minibot...

The manual says it is an allowed material. It makes no mention of how it must be used. Using it due to it's material properties should be perfectly legal.

Bill_B

31-01-2011 20:33

Re: Shrink Tubing on Minibot...

Don't have to shrink it. Nor does it still have to be tubing. Still has to fit in the 12x12x12 though. ;)

All times are GMT -5. The time now is 16:39.