Chief Delphi - ZomB Dashboard unresponsive

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - ZomB Dashboard unresponsive (http://www.chiefdelphi.com/forums/showthread.php?t=90650)

MikeNimmo

31-01-2011 20:36

ZomB Dashboard unresponsive

1 Attachment(s)

Our team has recently been thinking about using the ZomB Dashboard. We just downloaded ZomB Version 0.7.1.350 and are using the SimpleRobot.cpp code with the ZomB header file and additions suggested here. After throwing the code into our cRio we found the "taco", which is supposed to move in accordance to the y value of the joystick, not budging no matter how much we beat on our joystick. Can someone help us resolve this? The text we got from NetConsole is attached as a .txt file below.

byteit101

01-02-2011 12:29

Re: ZomB Dashboard unresponsive

Quote:

Originally Posted by MikeNimmo (Post 1012843)

We just downloaded ZomB Version 0.7.1.350

Did you also install it? or more specifically, the new ZomB.out? this looks like WPILib version mismatch spew. Go to Start>Programs>ZomB>Install bindings to robot, enter your ip, install, reboot the robot, and try again. If it still does this, look at Start>Programs>ZomB>Binding Help, the section "C++ (DBPacket workaround)" and try that.

MikeNimmo

03-02-2011 21:30

Re: ZomB Dashboard unresponsive

We fixed it! The problem was that we were using the default dashboard image installation gave us. It worked fine as soon as we made our own dashboard image and used that.

All times are GMT -5. The time now is 03:40.