Chief Delphi - Wind River won't start; gives license error

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- C/C++ (http://www.chiefdelphi.com/forums/forumdisplay.php?f=183)

- - Wind River won't start; gives license error (http://www.chiefdelphi.com/forums/showthread.php?t=90743)

MPlant

01-02-2011 21:57

Wind River won't start; gives license error

It is for these sort of reasons I hate workbench. I installed it and it works fine, then, out of absolutely no were, trying to open it up gives this error:

Code:

Something went wrong while looking for the license: Overall License for the Wind River Workbench

System clock has been set back

Feature WR_WORKBENCH

License path: I'm not going to write this out

FLEXlm error: -88,309

Obviously this is a major issue. I suspect that it's because I'm running windows in a VB, however, I'd rather not have to partition my computer, as that would be annoying getting everything working again after.
Yes, I've tried reinstalling it.
My question is, have any of you guys gotten this error? If so, were you able to fix it? I have no idea why it seems to think that my sys clock was set back, because it was, well, never touched. What do you think?

basicxman

01-02-2011 22:15

Re: Wind River won't start; gives license error

Quote:

Originally Posted by MPlant (Post 1013819)

License path:[/color] I'm not going to write this out[/code]

This could be quite a useful piece of information, screenshot?

Quote:

Originally Posted by MPlant (Post 1013819)

I suspect that it's because I'm running windows in a VB, however, I'd rather not have to partition my computer, as that would be annoying getting everything working again after.

I believe I've run WindRiver in a VM before, with a 64-bit host.

Quote:

Originally Posted by MPlant (Post 1013819)

Yes, I've tried reinstalling it.
My question is, have any of you guys gotten this error? If so, were you able to fix it? I have no idea why it seems to think that my sys clock was set back, because it was, well, never touched. What do you think?

What is your licensing procedure during installation? You should have to specify a licensing file off the DVD-ROM.

MPlant

01-02-2011 23:36

Re: Wind River won't start; gives license error

I did specify a license file off the DVD-ROM, which is what makes it all together much more odd. I'll try and post a screen shot later if I have time.

basicxman

02-02-2011 12:09

Re: Wind River won't start; gives license error

Quote:

Originally Posted by MPlant (Post 1013913)

I did specify a license file off the DVD-ROM, which is what makes it all together much more odd. I'll try and post a screen shot later if I have time.

Okay, until then I would recommend contacting official support.

MPlant

02-02-2011 20:58

Re: Wind River won't start; gives license error

I just decided to partition my drive - it was much easier of an option,

All times are GMT -5. The time now is 17:47.