Chief Delphi - Driving with tower

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Driving with tower (http://www.chiefdelphi.com/forums/showthread.php?t=90773)

falconmaster

02-02-2011 16:28

Driving with tower

http://www.youtube.com/watch?feature...&v=AsOqqhi-eGA

billbo911

02-02-2011 16:34

Re: Driving with tower

We've had problems in the past with Wedge Top too. The solution we used was to insert #10 screws through the tread and into the wheel. Make sure the screw heads do not penetrate the tread or tear a larger hole and you should be good.

Chris is me

02-02-2011 16:52

Re: Driving with tower

Drill and rivet each end of the tread to those Plaction wheels and you will have zero problems.

Bruceb

02-02-2011 17:51

Re: Driving with tower

Are those this years plaction wheels with the wire conveyer belt connectors?
Bruce

thefro526

02-02-2011 18:10

Re: Driving with tower

Quote:

Originally Posted by Chris is me (Post 1014326)

Drill and rivet each end of the tread to those Plaction wheels and you will have zero problems.

We also throw a rivet in approximately 180* from where the tread meets, just in case one of the retaining groves in the wheel gets damaged.

Siri	02-02-2011 18:53

Re: Driving with tower

Nice test drive! We use the screw method with thread brass inserts for the plaction wheels. Works great and makes for an easy switch-out. Description

All times are GMT -5. The time now is 21:25.