Chief Delphi - 1726 arm prototype video

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - 1726 arm prototype video (http://www.chiefdelphi.com/forums/showthread.php?t=90809)

gorrilla

08-02-2011 17:20

Re: 1726 arm prototype video

Is your cylinder mounted between the two expanders?

TheOtherGuy

08-02-2011 17:52

Re: 1726 arm prototype video

Quote:

Originally Posted by gorrilla (Post 1018608)

Is your cylinder mounted between the two expanders?

Yes, on the side of the pivot opposite the tube pickup, so a closed piston opens the claw. There are also stoppers (screws) in the PVC that align the claw when closed.

gorrilla

08-02-2011 21:29

Re: 1726 arm prototype video

What are the claws made of? I made mine out of PVC, but yours seem like flat pieces, how do they pivot?

MrForbes

08-02-2011 22:11

Re: 1726 arm prototype video

The "fingers" in the video are 1/4" plywood taped with blue masking tape to prevent splinters. We're working on building new ones from Lexan and using top and bottom fingers on each side, separated by spacers..

All times are GMT -5. The time now is 08:25.

Page 2 of 2

Show 100 post(s) from this thread on one page