Chief Delphi - deans on mini bot

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - deans on mini bot (http://www.chiefdelphi.com/forums/showthread.php?t=90936)

ffej-.-

04-02-2011 19:22

deans on mini bot

looking at the tamiya connectors on the original battery they only allow a 10 amp draw so i was wondering if it is legal to use deans in their place?

Mike Betts

04-02-2011 20:02

Re: deans on mini bot

Quote:

Originally Posted by ffej-.- (Post 1015777)

looking at the tamiya connectors on the original battery they only allow a 10 amp draw so i was wondering if it is legal to use deans in their place?

If you are not certain if <R92> covers it, I'd ask the GDC formally. My guess is that they will say no.

Mr.G	04-02-2011 23:37

Re: deans on mini bot

I hope they can be used. They are a much better connector.

Joe Ross

04-02-2011 23:44

Re: deans on mini bot

Quote:

Originally Posted by ffej-.- (Post 1015777)

looking at the tamiya connectors on the original battery they only allow a 10 amp draw so i was wondering if it is legal to use deans in their place?

The current rating is a maximum continuous current draw. You won't be running it for hours at a time, most likely only a few seconds, so that shouldn't be a concern. There may be other reasons to choose another connector, however.

All times are GMT -5. The time now is 16:48.