Chief Delphi - chains/sprockets on minibot

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)

- - chains/sprockets on minibot (http://www.chiefdelphi.com/forums/showthread.php?t=90966)

Kohala2460

05-02-2011 03:14

chains/sprockets on minibot

Are there any rules regarding limitations of chains and/or sprockets on the minibot? Can they be used?

EricH

05-02-2011 04:59

Re: chains/sprockets on minibot

Please read <R92>. If it is not on the list of allowed parts, it is not allowed.

However: Chain and sprockets happen to be available as Tetrix parts. You could also make sprockets out of aluminum sheet or polycarb. Chain, though, beyond the Tetrix stuff, is going to be much harder to make out of the allowed materials.

Kohala2460

05-02-2011 05:55

Re: chains/sprockets on minibot

Quote:

Originally Posted by EricH (Post 1015996)

Please read <R92>. If it is not on the list of allowed parts, it is not allowed.

Oh myy.. Failed to notice that rule. total embarassment :o

Thanks for the heads up :)

All times are GMT -5. The time now is 00:29.