Chief Delphi
Page 3 of 3 < 12 3
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   CRio Connection: Buggy (http://www.chiefdelphi.com/forums/showthread.php?t=91035)

mswalker 13-02-2011 14:09
Re: CRio Connection: Buggy
 
We reimaged with the v28 image and things seem to be working as expected. Joe, thanks for figuring this out and fixing it!

Blackphantom91 13-02-2011 16:09
Re: CRio Connection: Buggy
 
how do we update to v28 please help?

Mark McLeod 13-02-2011 20:12
Re: CRio Connection: Buggy
 
Take the LabVIEW v28 image from Source Forge and drop it in:
C:\Program Files\National Instruments\LabVIEW 8.6\project\CRIO Tool\FRC Images\FRC_2011_v28.zip

Then it will appear in the cRIO Imaging Tool list.

Blackphantom91 14-02-2011 11:53
Re: CRio Connection: Buggy
 
@ mark
Thanks ill try it when I get to build site.

Blackphantom91 14-02-2011 17:09
Re: CRio Connection: Buggy
 
It works thank your very much.

thE_iyE 15-02-2011 00:08
Re: CRio Connection: Buggy
 
Just to cover some bases for ChaosX73:

Quote:
Originally Posted by ChaosX73 (Post 1016951)
It's not the fact that there is no code, it's the fact that for some reason, the CRio doesn't want to admit that it's connected to my computer. My mentor said something about the CRio being "Bricked" but I have no idea what that means.
I can't seem to image the cRio from my personal laptop, so I have to use the classmate. I 'bricked' (which means to turn it into an expensive paper-weight) our cRio by using the imaging tool on my laptop, so the way you have to fix it is format the cRio. You format it by putting the cRio in safe-mode. Once its in safe mode, try to deploy code using the imaging tool. It will recognize it in safe-mode and ask if you want to format it, do so. This will return it to its normal state so you can put new code on.

Its likely not bricked, so try and just deploy v28, but if your computer doesn't recognize it and the IP address doesn't seem to be recognized by your computer, its likely bricked.

Again, this is just to cover some bases for ChaosX73. Hope it helps! :D

Turbinator 15-02-2011 12:47
Re: CRio Connection: Buggy
 
where do we put the downloaded image on the PC so it shows up in frc crio imaging tool.
thanks:)

Turbinator 15-02-2011 12:49
Re: CRio Connection: Buggy
 
nvm got it guys. thanks

otherguy 28-02-2011 19:54
Re: CRio Connection: Buggy
 
Heads up.

Our team played at the Suffield Shakedown, they had the real field and FMS setup.

Our cRIO was imaged with this early release version of v28 and our robot was not able to connect to the field.

I can't say for sure if others will see this same issue at regionals, but avoid the headache an re-image asap using the official release.

jhersh 02-03-2011 14:50
Re: CRio Connection: Buggy
 
Quote:
Originally Posted by otherguy (Post 1032862)
Heads up.

Our team played at the Suffield Shakedown, they had the real field and FMS setup.

Our cRIO was imaged with this early release version of v28 and our robot was not able to connect to the field.

I can't say for sure if others will see this same issue at regionals, but avoid the headache an re-image asap using the official release.
There is no difference. v28 is v28 regardless of how you got it.


All times are GMT -5. The time now is 01:32.
Page 3 of 3 < 12 3
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi