Optical Encoders Help!!!!!!!!!!!!!
 

How many optical encoders are we allowed to use on the robot this year?

Re: Optical Encoders Help!!!!!!!!!!!!!
 

Well, it depends, i believe it is limitless. The only snag you may have is the number of C-Rio Cards you have and sidecars you have. Other than that i believe those are the only limits... we have left over digital inputs on our sidecar and on the C-Rio itself... We're using 4 encoders, the linetrackers, an optical sensor, and the compressor... how many do you plan to use?

Re: Optical Encoders Help!!!!!!!!!!!!!
 

Do you mean how many encoders are we using or compressors?

Re: Optical Encoders Help!!!!!!!!!!!!!
 

how many encoders you want to use

Re: Optical Encoders Help!!!!!!!!!!!!!
 

You are actually limited to 12 in hardware. Why? The FPGA can only handle 8 Counters and 4 Encoders. the Encoder library uses Encoders for 4x decoding (meaning you can use up to (4) 4x-decoded encoders) and Counters for 1x or 2x decoding (meaning you can have up to (8) 1x or 2x-decoded encoders). 4+8=12, so 12 encoders max.

This assumes that each encoder is either quadrature or otherwise uses the FPGA Counters (such as a gear tooth sensor).

If you need more than 12, your best bet would probably be to use a co-processor to handle the inputs and either feed them to the cRio via SPI, I2C, Serial, or DACs.

Re: Optical Encoders Help!!!!!!!!!!!!!
 

You're limited to 41 jaguars by cost, but each jaguar can read a single encoder using CAN.