Chief Delphi - e-stop replacement

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - e-stop replacement (http://www.chiefdelphi.com/forums/showthread.php?t=91324)

2bkrul

09-02-2011 09:04

e-stop replacement

Is there anywhere I can go to get another e-stop. Andymark is out of stock ::safety::

basicxman

09-02-2011 09:06

Re: e-stop replacement

You could probably buy any old switch and wire it correctly (correct me if I'm wrong?).

In the meantime, double-clicking Stop Button under Diagnostics will disable the requirement of a stop-button after twenty seconds.

2bkrul

09-02-2011 09:08

Re: e-stop replacement

Quote:

Originally Posted by basicxman (Post 1019029)

In the meantime, double-clicking Stop Button under Diagnostics will disable the requirement of a stop-button after twenty seconds.

I already had one instance where I needed it already...now I know not to let rookies touch LabVIEW

basicxman

09-02-2011 09:10

Re: e-stop replacement

Quote:

Originally Posted by 2bkrul (Post 1019030)

I already had one instance where I needed it already...now I know not to let rookies touch LabVIEW

I believe there are some keyboard shortcuts, I would just use a wireless keyboard in the meantime, test the reliability of it for safety of course.

pfreivald

09-02-2011 09:22

Re: e-stop replacement

Quote:

Originally Posted by 2bkrul (Post 1019030)

I already had one instance where I needed it already...now I know not to let rookies touch LabVIEW

Of course by this you mean "now I know to run the robot on tether when testing code, and have a person with a hand on the jack in case the robot decides to Run Amok and Destroy its Masters", right?

Ken Streeter

09-02-2011 09:23

Re: e-stop replacement

Quote:

Originally Posted by 2bkrul (Post 1019030)

I already had one instance where I needed it already...now I know not to let rookies touch LabVIEW

FYI, after the "stop button" has been disabled as described above, the space bar no the drivers station (laptop) becomes the "stop button." Knowing how to STOP the robot from the drivers station in case of an emergency is something that everybody on the team should know.

Alan Anderson

09-02-2011 09:26

Re: e-stop replacement

The Driver Station space bar is always active as the "disable" control. F1 acts as "enable".

2bkrul

09-02-2011 11:19

Re: e-stop replacement

Quote:

Originally Posted by pfreivald (Post 1019038)

Of course by this you mean "now I know to run the robot on tether when testing code, and have a person with a hand on the jack in case the robot decides to Run Amok and Destroy its Masters", right?

I mean 'dont step away from a laptop with LabVIEW open with a bunch of people around me and expect there to be no problems when you try to show tank drive to visitors.' It was actually quite embarrassing, but they understood.

pfreivald

09-02-2011 11:55

Re: e-stop replacement

Quote:

Originally Posted by 2bkrul (Post 1019114)

Ah. I call that an IMC problem. (Insufficient Minion Control).

All times are GMT -5. The time now is 09:53.