Chief Delphi - Possible bad Jaguar.... Thoughts?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Possible bad Jaguar.... Thoughts? (http://www.chiefdelphi.com/forums/showthread.php?t=91345)

wilsonmw04

22-02-2011 20:03

Re: Possible bad Jaguar.... Thoughts?

Quote:

Originally Posted by Ken Streeter (Post 1020161)

Phil,

Glad to hear that your swap worked and that you're off and running again. I would highly suggest that you follow the RMA procedure to return the black Jaguar to TI, as described at http://forums.usfirst.org/showthread.php?p=44255 I'm curious to hear what the problem ends up having been.

Best regards,
--ken

I am trying to get this info on the jaguar RMA. I tried the above site and the provided link seems to be broken. is there any other way to request an RMA?

dyanoshak

22-02-2011 20:17

Re: Possible bad Jaguar.... Thoughts?

The forum software truncates the URL for some reason. Click Here for the RMA form.

Follow the procedure here but use the form link above.

-David

hydrocannon

23-02-2011 12:30

Re: Possible bad Jaguar.... Thoughts?

bad jaguars we lost three out of four in the last few days and last night we realized the crio was recieving twice has much power has it suposed too could are jaguars been because they were recieving to much power?:confused:

Al Skierkiewicz

23-02-2011 15:47

Re: Possible bad Jaguar.... Thoughts?

hydro,
There is no way for you to supply twice as much power to the Crio. It should be connected to the +24 volt output connector on the PD. This is the highest voltage on the robot. Everything else is either 12 volts or below. The Jaguars receive no power from the Crio.

All times are GMT -5. The time now is 07:18.

Page 2 of 2

Show 100 post(s) from this thread on one page