Chief Delphi - Deploying Code

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Deploying Code (http://www.chiefdelphi.com/forums/showthread.php?t=91479)

jhellr13

11-02-2011 06:31

Deploying Code

Quick Question. We were having some problems. We are using labview, and want to run the code before sending it over wirelessly. We know to connect and ethernet cable from the classmate to the first port on the cRIO. We tried this and had some errors. Do i have to change any internet settings? How do i go about doing this task?

Thanks

Jon236

11-02-2011 06:45

Re: Deploying Code

Go to the KOP website here: http://www.usfirst.org/roboticsprogr....aspx?id=18530
and read the manuals that are posted there. They will take you step-by-step through the process.

jhellr13

11-02-2011 07:18

Re: Deploying Code

Quote:

Originally Posted by Jon236 (Post 1020398)

Go to the KOP website here: http://www.usfirst.org/roboticsprogr....aspx?id=18530
and read the manuals that are posted there. They will take you step-by-step through the process.

Thanks for the fast reply. Which specific manual should I look out?

Alan Anderson

11-02-2011 09:19

Re: Deploying Code

Quote:

Originally Posted by jhellr13 (Post 1020408)

Which specific manual should I look out?

Look for the one(s) that would address "some problems" and "some errors" that you're getting. Without getting more detail from you about the trouble, good advice is hard to give.

All times are GMT -5. The time now is 09:11.