Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)
-   -   Minibot deployment system problem.. (http://www.chiefdelphi.com/forums/showthread.php?t=91576)

gilkeedman 12-02-2011 09:47

Minibot deployment system problem..
 
Another team asked us if the deployment system of the Minibot is a part of the general maximum weight of the Hostbot.
The manual says:
Quote:

For the purposes of determining compliance with the weight and volume limitations, the
items listed below are NOT considered part of the ROBOT and are NOT included in the
weight and volume assessment:
A. the 12V battery and its associated half of the Anderson cable quick
connect/disconnect pair (including no more than 12” of cable per leg, the associated
cable lugs, connecting bolts, and insulating electrical tape),
B. BUMPER assemblies (including BUMPER covers, if appropriate) that are in
compliance with Rules <R07> and <R08>,
C. the OPERATOR CONSOLE, and
D. the MINIBOT.
What do you think?

Al Skierkiewicz 12-02-2011 09:49

Re: Minibot deployment system problem..
 
The minibot is not part of the hostbot weight. The deployment system is part of the weight.

gilkeedman 12-02-2011 10:04

Re: Minibot deployment system problem..
 
Thank you, we just wanted to be sure that's the case.


All times are GMT -5. The time now is 06:49.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi