Chief Delphi - Modified or FABRICATED axis camera

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Modified or FABRICATED axis camera (http://www.chiefdelphi.com/forums/showthread.php?t=91587)

amoose136

12-02-2011 11:17

Modified or FABRICATED axis camera

Is it possible to use an axis camera that has the little m4 screw on the back replaced with a longer one? This wouldn't effect the electrical part of the camera but would mean opening up the case.

phoenix_fire

12-02-2011 16:29

Re: Modified or FABRICATED axis camera

Quote:

Originally Posted by amoose136 (Post 1021238)

Is it possible to use an axis camera that has the little m4 screw on the back replaced with a longer one? This wouldn't effect the electrical part of the camera but would mean opening up the case.

There is nothing in the rules that says you can't modify the camera, as long as it stays electrically isolated from the chassis <R36>.

All times are GMT -5. The time now is 16:39.