Chief Delphi - Set Speed

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Set Speed (http://www.chiefdelphi.com/forums/showthread.php?t=91725)

jhellr13

13-02-2011 16:34

Set Speed

Quick Question
Is there a way to set a maximum speed for all 4 motors on our drivetrain? I was thinking motor set output, but i couldn't understand where to wire it and how to configure it. Do i have to use an encoder to set a maximum speed for the drivetrain?

Thanks

WizenedEE

13-02-2011 20:22

Re: Set Speed

What do you mean by set a maximum speed? You could just a multiply block and then a .9 to your joystick values.

Wolfgang

13-02-2011 20:33

Re: Set Speed

Maximum speed should be 1 or -1 for any motor. Try seeing if you can wire some kind of boolean value since they are always 1 or 0. That way you will have no movement or maximum speed.

All times are GMT -5. The time now is 09:13.