Chief Delphi - Cutting and Fusing Belt

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Cutting and Fusing Belt (http://www.chiefdelphi.com/forums/showthread.php?t=91771)

Spirator

14-02-2011 01:26

Cutting and Fusing Belt

Hello, we're considering cutting and fusing some long gates belt for a conveyor. Have any teams attempted this previously?

sanddrag

14-02-2011 03:15

Re: Cutting and Fusing Belt

Quote:

Originally Posted by Spirator (Post 1022480)

Hello, we're considering cutting and fusing some long gates belt for a conveyor. Have any teams attempted this previously?

I doubt you'll have much luck fusing rubber timing belt. Try urethane belt instead.

Spirator

14-02-2011 20:08

Re: Cutting and Fusing Belt

Do you have recommendations for tacky roller material?

AustinSchuh

14-02-2011 20:30

Re: Cutting and Fusing Belt

Polycord. It was used in all sorts of ball systems in 2009, and on some of the 2007 claws. It's not too hard to fuse together by hand with some heat and patience.

harryji369

14-02-2011 20:47

Re: Cutting and Fusing Belt

my team is using a belt lock to hold the sides together but it only works if you don`t need the belt to do a full revoloution

All times are GMT -5. The time now is 12:22.