Re: 6 poll 2 way switch...
 

Fritz,
What you are showing in your links is either a 2 pole double throw or a two pole double throw center off switch. Yes there are house switches that are equivalent, but hard to find. You may not use the one in the pictures as they are not classified as house type switches. The "two pole" refers to the two distinct circuits (three terminals on one side and three on the other.) The "double throw" refers to pushing the switch up connects the bottom two terminals on each side. Pushing it down connects the top two terminals on each side. In order to be a "six pole" switch, you would need six columns of three terminals each or a total of 18 terminals.

Re: 6 poll 2 way switch...
 

What you have shown are DPDT switches, or Double Pole, Double Throw. The switches you have shown are also illegal to use as they are not designed to go into a household application for lighting.

Here is a 4PDT switch: http://media.digikey.com/photos/NKK%...os/S42_sml.jpg

6PDT's are very uncommon.

Please stop trying to make an argument and help us out. I cannot care less about what you're using it for. We're all on this board to help other teams out. If you want to start an argument, go elsewhere. If you want help, provide us with some information for what you are trying to do.

Are you trying to make an electronic brake for your mini-bot? You can get away with a SPDT switch to do that with. We don't know what you want to do.

Also, you apparently don't know what you're talking about with electrical, so please stop arguing there. 6PDT != DPDT.

Re: 6 poll 2 way switch...
 

From the picture it appears that as was noted the sw in question is a on-off-on style switch it can be used for motor reversing. Unfortunately that sw is not legal. There is no identical function switch that qualifies as a "common household sw". The legal "common household" 4way sw can be used to reverse motors but it lacks the center off position.

Re: 6 poll 2 way switch...
 

I know i have said that I do not know electrical terms several times and yes i guess i do mean a DPDT i am not sure. we are useing the switch to reverse the Mini-Bot when iot hits the top

Re: 6 poll 2 way switch...
 

yes it is just an on/off switch so the one i have is not leagal.
thanks for the help that was what i was looking for

Re: 6 poll 2 way switch...
 

hey man thanks for the clearification i actually missed you post the first time i looked throught it do you have a site i could go to to maybe buy one of these switches?

Re: 6 poll 2 way switch...
 

Does the switch need to reverse the minibot, or will it roll back down if you just turn it off? did you try that?

Re: 6 poll 2 way switch...
 

i was misenformed about what kind of switch i had by my mentor i am sorry

Re: 6 poll 2 way switch...
 

Did you try reversing the motors coming back down on a pole? I suspect your minibot will crash down very fast especially applying full 12V reverse and with gravity helping. Our team uses NXT with running code. We tried programming it with 5% power coming down and it kept accelerating faster and faster. So we ended up just stopping the motors and it was coasting down with a nice and slow constant speed. So the point is, you may not want to reverse anyway. That will drastically simplify your circuit. Check out this thread.
http://chiefdelphi.com/forums/showthread.php?t=91678

Re: 6 poll 2 way switch...
 

Here is where I get 4 pole and 6 pole double throw switches. I use these in my job.https://www.c3controls.com/cam-switch-changeover.cfm
It is probably not going to be legal.

Re: 6 poll 2 way switch...
 

our mini-bot does not go down the pole by itself it needs to go into reverse so i need a dpdt light switch if they are real

Re: 6 poll 2 way switch...
 

http://www.4.midlightelectric.com/ac...ton106617.html
does this count?

Re: 6 poll 2 way switch...
 

Yes, that is legal.

Re: 6 poll 2 way switch...
 

so what about this one
http://imgs.tootoo.com/cb/70/cb70aad...6148628e3f.jpg

Re: 6 poll 2 way switch...
 

Nope!