Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Minibot times (http://www.chiefdelphi.com/forums/showthread.php?t=92114)

lastrideelhs 17-02-2011 17:17

Minibot times
 
I'm curious as to how fast other team's minibots can climb?

R1ffSurf3r 17-02-2011 18:52

Re: Minibot times
 
<1.3

davidthefat 17-02-2011 19:23

Re: Minibot times
 
~4 Sec... I am very disappointed.

lastrideelhs 17-02-2011 19:31

Re: Minibot times
 
are those times with the battery or no?

R1ffSurf3r 17-02-2011 19:41

Re: Minibot times
 
with

BornaE 17-02-2011 20:01

Re: Minibot times
 
1.4 at the moment. but we know that our wheels are slipping. will be trying new material after ship

avanboekel 17-02-2011 21:38

Re: Minibot times
 
3.5 is our best time so far. Our wheels have been slipping when we were testing during the past week though.

Grim Tuesday 17-02-2011 21:47

Re: Minibot times
 
2.5 is our best, no gearboxes have been taken off...yet.

rcmolloy 17-02-2011 21:55

Re: Minibot times
 
Quote:

Originally Posted by R1ffSurf3r (Post 1025408)
<1.3

Maybe the same.

Mike Martus 17-02-2011 22:12

Re: Minibot times
 
I can't press my IPhone fast enough!

AndyH 17-02-2011 22:12

Re: Minibot times
 
Team 1098 complete minibot seems to be running a consistant 2.5 sec. I am happy because it is reliable.

pfreivald 17-02-2011 22:47

Re: Minibot times
 
We're about 2.5 seconds too.

For the life of me I can't figure out how people are getting sub-two second times. Good for them!

(In my defense, I haven't been heavily involved in minibot development...)

tagayoff 18-02-2011 14:13

Re: Minibot times
 
Quote:

Originally Posted by pfreivald (Post 1025614)
We're about 2.5 seconds too.

For the life of me I can't figure out how people are getting sub-two second times. Good for them!

(In my defense, I haven't been heavily involved in minibot development...)

Custom wheels, (PVC) with direct drive and magnets.

liam.larkin 18-02-2011 14:30

Re: Minibot times
 
We took the mean of 20 runs- Came up with 3.25 seconds. This is for the whole thing deployment and climb. We are very pleased. I am going to publish 4 seconds on our competition distribution sheet however because I know how the students get those itchy fingers and "trigger" the stop watches a little early for sure.

pfreivald 18-02-2011 14:32

Re: Minibot times
 
Quote:

Originally Posted by tagayoff (Post 1026013)
Custom wheels, (PVC) with direct drive and magnets.

Direct drive as in no gearing whatsoever besides the wheels???


All times are GMT -5. The time now is 16:52.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi