Problems Deploying Code
 

Hi there,

We are at the stage in which we are trying to deploy the code to our robot. We are running C++ in Windriver and our code works perfectly well when we run it. When we try to deploy the code, Windriver says we do deploy the code, but the deployment seems to stop with about 25% remaining. When we go to use the robot, we get a no robot code message. We using a Toshiba Satellite L675 with Windows 7 64-bit. We have gotten the Licproxy error and run that manually when building. Any help is appreciated.

Re: Problems Deploying Code
 

Any help? Our Problem is similar o the deployment problem experienced by Team 2606 found here.

Re: Problems Deploying Code
 

The problem was solved as detailed in this thread

Re: Problems Deploying Code
 

We have it working now, the fix is found here.