Chief Delphi - Cart Rules

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Cart Rules (http://www.chiefdelphi.com/forums/showthread.php?t=93084)

DavidGitz

02-03-2011 17:12

Re: Cart Rules

Quote:

Originally Posted by davidthefat (Post 1033330)

A wheelbarrow

This is funny.

Karibou

02-03-2011 19:04

Re: Cart Rules

We use something very similar to this. Every year we change it a bit, adding on supports so that it holds up the robot in the right places, but it has worked well in the pit. Being able to adjust the height is very convenient - we can raise it if we need to work on something lower down on the bot, but when the table is all the way down, the robot easily fits through doors.

PAR_WIG1350

02-03-2011 19:33

Re: Cart Rules

Quote:

Originally Posted by dbeckwith (Post 1033613)

That might be difficult for a lot of teams that have tall arm mounts, such as ours. Our cart that we have is just high enough so we don't have to bend over to work on the robot, but the robot is definitely is too tall for a door when it's on the cart.

It might be possible to modify the cart so that the robot lies down on top of it, That would allow you to use the same cart to hold and move your robot.

All times are GMT -5. The time now is 16:04.

Page 2 of 2

Show 100 post(s) from this thread on one page