Chief Delphi - linear actuator

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - linear actuator (http://www.chiefdelphi.com/forums/showthread.php?t=93118)

sitzikbs

02-03-2011 11:04

linear actuator

hi,
are these allowed?
http://www.hiwinmikro.com/html/linea...tors/las3.html
http://www.hiwinmikro.com/html/linea...tors/las4.html
if not, which rules sais so ?
thanks

Craig

02-03-2011 11:13

Re: linear actuator

The actuators themselves are allowed, it is the motors that are not.

If you were to adapt/mount a FIRST legal motor (from the kit or as described in the motor section of the rules) to the actuator shown it would be legal for use in competition

Jeffy

02-03-2011 11:40

Re: linear actuator

Quote:

Originally Posted by sitzikbs (Post 1033603)

hi,
are these allowed?
http://www.hiwinmikro.com/html/linea...tors/las3.html
http://www.hiwinmikro.com/html/linea...tors/las4.html
if not, which rules sais so ?
thanks

We have used the top one before and replaced it with an older FP. They cannot take the load that the FP can make, so i wouldn't use these in high load applications.
I don't know anything about the second one listed.

All times are GMT -5. The time now is 18:37.