Chief Delphi - FTC Motor Mount

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - FTC Motor Mount (http://www.chiefdelphi.com/forums/showthread.php?t=93353)

nick_sheets

08-03-2011 00:53

FTC Motor Mount

Our team is trying to mount the FTC motor without a gearbox while direct driving some rollers.

We were wondering if any teams figured out a clean and secure way to mount the motor!

Thanks!

Chris is me

08-03-2011 01:04

Re: FTC Motor Mount

The motor can be mounted with M3 screws.

Mounting "something" to the motor shaft is best done with a press fit.

Colin P

08-03-2011 01:36

Re: FTC Motor Mount

Wrapping electrical tape around the motor would make it fit into the regular mounts. It isn't perfect, but it works well enough.

nick_sheets

08-03-2011 02:00

Re: FTC Motor Mount

Quote:

Originally Posted by Chris is me (Post 1036374)

The motor can be mounted with M3 screws.

Mounting "something" to the motor shaft is best done with a press fit.

Is this without the large gearbox on? Or is this wtih?

All times are GMT -5. The time now is 03:07.