Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: The face of Taranis (http://www.chiefdelphi.com/forums/showthread.php?t=93544)

Wayne Doenges 13-03-2011 17:13

pic: The face of Taranis
 

MattC9 13-03-2011 17:14

Re: pic: The face of Taranis
 
Paint the tread on the bottom like a tongue, then it would be complete.

wilsonmw04 13-03-2011 21:25

Re: pic: The face of Taranis
 
The first thing that came to mind was sometime like:
Quote:

Can I haz Uber tubes??! k, thanks!
But that just didn't seem to fit...

Navid Shafa 14-03-2011 00:50

Re: pic: The face of Taranis
 
Awesome, it's great to see another team utilizing klikos! I take it that the klikos in the picture are not permanent, I'm assuming that it just wasn't pop-riveted at the time...

Wayne Doenges 14-03-2011 07:44

Re: pic: The face of Taranis
 
Quote:

Paint the tread on the bottom like a tongue, then it would be complete
I'm confused. It is colored red, so it's a tongue.

Yes, the Cleco is just there temporarily. It has been riveted.
We have about 300 Clecoes to use. And believe me we use them.

rsisk 14-03-2011 10:21

Re: pic: The face of Taranis
 
Looks like a deer from a Far Side cartoon... love it!

P.S. What is a Cleco?

Navid Shafa 14-03-2011 12:36

Re: pic: The face of Taranis
 
The klikos seen in this picture are near the bottom of the lexan ears. They are used as a placeholder to keep something where you want it before pop-riveting. In this case, it's likely someone drilled those holes, expanded the kliko, put it in and let it fit into place. This way the part can't move away from the hole locations.

(The kliko is that cylindrical looking copper-ish thing, and there are 2 of them)

Wayne Doenges 15-03-2011 10:10

Re: pic: The face of Taranis
 
Navid, the correct spelling is Cleco.

A Cleco is a temporary rivet. It allows to assemble/disassemble your part to your hearts content. When you have the part ready to assemble you remove the Clecoes (a little at a time) and insert rivets.

As far as I know, Team 1501 is the only team that uses a fully monocoqued robot.

Navid Shafa 13-04-2011 03:31

Re: pic: The face of Taranis
 
Thanks Wayne, but I am familiar with them. We have plenty and we used hundreds of them this season alone. I think you'll find that your spelling is not the only one around. There are products that we use which are brand-named "Kliko" and "Kwik-Lock"

Cleco may be the spelling you are familiar with, but some of the ones I use actually say "Kliko" on them, this may just be the brand name. I really don't care what they are called, I know what they do and how the ones I have seen are spelled. That's good enough for me...

DonRotolo 13-04-2011 21:03

Re: pic: The face of Taranis
 
Taranis Aurus Rex?


All times are GMT -5. The time now is 12:26.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi