Chief Delphi - How to use driver station inputs

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - How to use driver station inputs (http://www.chiefdelphi.com/forums/showthread.php?t=94314)

mutantblond

04-04-2011 20:09

How to use driver station inputs

i have looked many places for an answer to this, and I knew how to do this 6 weeks ago, but now I can't figure out how to turn a digital input on or off on the driver's station. We're calling it correctly, with ds->GetDigitalIn(1), for instance, but on the screen itself, I'm not sure which button this is, or how to turn it on or off.
thanks!

WizenedEE

04-04-2011 20:42

Re: How to use driver station inputs

Go over to the I/O tab and click on one of the buttons. You may have to click on "configure" and select compatibility IO.

Or, you could attach the cypress I/O board that came in the KOP and wire in some switches.

All times are GMT -5. The time now is 23:06.