Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Exploding Bacon's Spamthingamicon! (Octocanum) (http://www.chiefdelphi.com/forums/showthread.php?t=95506)

Andrew Remmers 05-06-2011 15:41

pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 

Hawiian Cadder 05-06-2011 15:42

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
that is an absolutely incredible cad job. I'm curious what software you use and how long all those renders took.

Ankit S. 05-06-2011 16:02

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Oh. My. Goodness. I don't think there is a word in any language that can describe this CAD model...

How long did it take?

Thermal 05-06-2011 16:08

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
You may want to consider swapping which wheel you have articulate. If I understand these pictures correctly, right now you have your traction wheels on the jump drive, which means if you take a lateral hit while in traction mode you risk trashing your modules.

lemiant 05-06-2011 16:16

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
AMAZING!!!

Why did you choose to go with lightened sheet instead of thinner, non-holed stock?

Andrew Remmers 05-06-2011 16:25

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
First off Thanks for the awesome comments!!!

Quote:

that is an absolutely incredible cad job. I'm curious what software you use and how long all those renders took.
I used Autodesk Inventor 2011 for this model and this was my very first sheet metal drive train. I rendered it in Autodesk Showcase and since I didn't really know what I was doing when I made these renders they are actually VERY low quality! They only took about a minute or so to make!


Quote:

Oh. My. Goodness. I don't think there is a word in any language that can describe this CAD model...

How long did it take?
The entire model since it was my first drive train ever took about a month total with something like 3-4 Iterations However it could have taken a much less time but I was pretty busy during that time so it was very much neglected for a while.



Quote:

You may want to consider swapping which wheel you have articulate. If I understand these pictures correctly, right now you have your traction wheels on the jump drive, which means if you take a lateral hit while in traction mode you risk trashing your modules.
Yes they do tilt on the mecanum shafts, and if we were going to actually build this now It would be updated a ton! However I really like my choice of the Cylinders! ;) They are purdy and actually really light compared to the other ones I was going to get!

- Andrew

Andrew Remmers 05-06-2011 16:27

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by lemiant (Post 1064801)
AMAZING!!!

Why did you choose to go with lightened sheet instead of thinner, non-holed stock?

From what I understand our sponsors have ALOT of .125 sheet laying all the time so I designed accordingly. We don't want to have special orders made for us when he cuts and bends everything completely free already! (even if a sheet of AL isn't really THAT crazy expensive)

- Andrew

Starke 05-06-2011 16:33

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by Joyride_67_1902 (Post 1064795)

Andrew,

Great job! Consider adding it to FRC Designs, which now include a frame subsystem page! See the CD Thread below and send me a PM if you are interested! Excellent work!

FRC Designs Thread: http://www.chiefdelphi.com/forums/showthread.php?threadid=95300

Matt

BrendanB 05-06-2011 18:25

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Phenomenal job! When will they be up for sale! ;)

Ankit S. 06-06-2011 01:28

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by Starke (Post 1064806)
Andrew,

Great job! Consider adding it to FRC Designs, which now include a frame subsystem page! See the CD Thread below and send me a PM if you are interested! Excellent work!


Matt

About that, it seems that you need to click on robot designs and select a year or click on the helpful links before you are even given the option to view subsystem designs.

Perhaps changing it so that the subsystem design tabs are visible from the get-go or so the drop down menu allows you to choose between subsystem designs or whole designs?

Starke 06-06-2011 07:31

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by BeltSanderRocks (Post 1064854)
About that, it seems that you need to click on robot designs and select a year or click on the helpful links before you are even given the option to view subsystem designs.

Perhaps changing it so that the subsystem design tabs are visible from the get-go or so the drop down menu allows you to choose between subsystem designs or whole designs?

I am not sure what you are talking about here. I have included a picture below of the home page of FRC Designs which shows the drop-down menu of subsystem designs. Make sure to refresh the homepage. I hope this helps!

Matt


Al Skierkiewicz 06-06-2011 07:42

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Andrew,
What a great drawing and render. Nice Job dude!

Arefin Bari 06-06-2011 09:11

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
That is a wonderful render and beautiful cad work. Great job.

Throughout the past 6 years of team 1902's existence; your students, parents and mentors have become an inspiration to all Florida teams. You guys continue to grow in all aspects of the FIRST programs.

JVN 06-06-2011 11:17

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by Thermal (Post 1064800)
You may want to consider swapping which wheel you have articulate. If I understand these pictures correctly, right now you have your traction wheels on the jump drive, which means if you take a lateral hit while in traction mode you risk trashing your modules.

That was a lesson 148 learned in 2010. Our 2011 pre-season prototype and our 2011 robot had stationary traction wheels -- MUCH tougher.

-John

RogerR 06-06-2011 11:25

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
any relation to the original spamthingacon?

Nick Lawrence 06-06-2011 11:27

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
I dig the IFI control system.

Wonderful job, that's beautiful.

-Nick

Andrew Remmers 06-06-2011 11:47

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by RogerR (Post 1064882)
any relation to the original spamthingacon?

Yes, It was brought up to me by a few mentors who were involved the in the original design process. I figured I'd take the challenge and make one early build season 2010 (of course after build season was when I started cadding)
I had quite a while to doodle around and I found what would be a pretty neat system I thought. It took me a while to get a handle of the tools in Inventor since I had no idea what I was doing! My mentors Dan and Andrew sorta supervised me as I designed it and would give pointers at meetings something like every two weeks. We also designed for use of the old control systems since we had a ton of those just laying around collecting dust, I figured I might as well put them to work! (answering Nick's Comment :p )

Again thank you for the awesome comments! Maybe I should go redesign it one of these days! ;)

Madison 06-06-2011 12:09

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by JVN (Post 1064881)
That was a lesson 148 learned in 2010. Our 2011 pre-season prototype and our 2011 robot had stationary traction wheels -- MUCH tougher.

-John

I'm in the midst of a long vacation from my team, so I haven't had a chance to look at our robot closely since competition, but I don't recall anything seeming worse for wear as a result of lowering the traction wheels instead of the mecanum wheels. What sorts of failure/problems did y'all experience?

I liked the drive enough that I'm willing to optimize it and see what we can do to make it part of our standard toolbox. I'm interested in reading others' experiences with similar drives.

Andrew Schreiber 06-06-2011 12:25

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by Madison (Post 1064889)
I'm in the midst of a long vacation from my team, so I haven't had a chance to look at our robot closely since competition, but I don't recall anything seeming worse for wear as a result of lowering the traction wheels instead of the mecanum wheels. What sorts of failure/problems did y'all experience?

I liked the drive enough that I'm willing to optimize it and see what we can do to make it part of our standard toolbox. I'm interested in reading others' experiences with similar drives.

Have you posted a "review" of this style of drive anywhere? If not would you please consider doing so such that those of us who are considering investing the time in research don't have to start from scratch?

My main questions:

How often did you use the mecanum wheels?
The traction wheels?
How often did you use the omni-directional capabilities?
Do you feel that the added cost (complexity, time, money) was warranted given the benefits? Why?


Sorry for asking you to do all this but I'm genuinely curious how this type of hybrid drive worked out for teams this year.

Madison 06-06-2011 12:44

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by Andrew Schreiber (Post 1064891)
Have you posted a "review" of this style of drive anywhere? If not would you please consider doing so such that those of us who are considering investing the time in research don't have to start from scratch?

My main questions:

How often did you use the mecanum wheels?
The traction wheels?
How often did you use the omni-directional capabilities?
Do you feel that the added cost (complexity, time, money) was warranted given the benefits? Why?


Sorry for asking you to do all this but I'm genuinely curious how this type of hybrid drive worked out for teams this year.

I have been meaning to post something about our experiences, but haven't had time to really get my thoughts written down and organized.

The short version, which'll have to hold people over for a bit, is, "Holy crap, this is amazing."

Nathan Pell 06-06-2011 23:23

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
I just love the fact you still used the name "Spamthingacon"

Spam + Swamp Thing + Team Emticons...


Sweet!

Tytus Gerrish 06-06-2011 23:42

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
sounds familiar.

Andrew Remmers 07-06-2011 00:50

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
Quote:

Originally Posted by Nathan Pell (Post 1064955)
I just love the fact you still used the name "Spamthingacon"

Spam + Swamp Thing + Team Emticons...


Sweet!

I actually for purpose of theming called it the Baconmicon, However I figured CD would pick up on Spamthingamicon a little better so thats what I posted it as! :D

dudefise 07-06-2011 01:07

Re: pic: Exploding Bacon's Spamthingamicon! (Octocanum)
 
amazing... nice work!


All times are GMT -5. The time now is 22:53.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi