Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Sensors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=173)
-   -   How to attach Ultrasonic Sensor (http://www.chiefdelphi.com/forums/showthread.php?t=97689)

Krestent 07-10-2011 15:56

How to attach Ultrasonic Sensor
 
Hi,
I can find no information on how the ultrasonic sensor is to be connected to the Cortex controller. I did find info suggesting that the Input cable is supposed to go to analog and the output cable is supposed to go to Digital, but no dice there. Is there something I'm missing?

DonRotolo 08-10-2011 10:35

Re: How to attach Ultrasonic Sensor
 
Does this help?
http://www.vexrobotics.com/products/.../276-2155.html

Krestent 10-10-2011 16:34

Re: How to attach Ultrasonic Sensor
 
That was the first place I looked. All info on thatpage shows how to connect the sensor to the old PIC controller. The confusion is that the Cortex does not have any ports labeled "Interrupt".

Joe Ross 10-10-2011 16:57

Re: How to attach Ultrasonic Sensor
 
On the cortex, all digital ports may be used as interrupts. It's possible that your programming environment may have restrictions on what ports can be used with the ultrasonic sensor.

Krestent 13-10-2011 16:04

Re: How to attach Ultrasonic Sensor
 
So I hooked up the sensor to Digital 6 and 7, hooked it up, and found that any time I program the sensor into a program using EasyC, the Cortex refuses to execute anything. Do I have a bad sensor?


All times are GMT -5. The time now is 08:05.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi