Chief Delphi
Page 3 of 3 < 12 3
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   paper: FRC cRIO II (http://www.chiefdelphi.com/forums/showthread.php?t=97702)

Mark McLeod 10-01-2012 17:08
Re: paper: FRC cRIO II
 
I've seen that error go away when all other NICs get Disabled.

Alan Anderson 10-01-2012 22:16
Re: paper: FRC cRIO II
 
Quote:
Originally Posted by RufflesRidge (Post 1101671)
Make sure your computer's netmask is set to 255.255.255.0 and that you have disabled (by right clicking and selecting "Disable") any adapters other than the one being used to connect to the cRIO.
Quote:
Originally Posted by The Trooper (Post 1101672)
I have done that, and it still does that.
Are you certain? You might have a FireWire or VPN "network adapter" enabled. What does the result of the ipconfig command show you? Copy it here so we can check it for anything out of the ordinary.

You might also have a Windows firewall enabled. Shut anything like that off.

The Trooper 13-01-2012 09:55
Re: paper: FRC cRIO II
 
Quote:
Originally Posted by Alan Anderson (Post 1102118)
Are you certain? You might have a FireWire or VPN "network adapter" enabled. What does the result of the ipconfig command show you? Copy it here so we can check it for anything out of the ordinary.

You might also have a Windows firewall enabled. Shut anything like that off.
That worked! Thanks for the help, it works great now.

cvessalico 25-01-2012 10:46
Re: paper: FRC cRIO II
 
When we open the 2012 Imaging tool our Laptop can't find our new cRIO FRC II. Any Suggestions?

cvessalico 25-01-2012 17:16
Re: paper: FRC cRIO II
 
Nevermind, we figured it out it was the laptop firewalls!


All times are GMT -5. The time now is 08:47.
Page 3 of 3 < 12 3
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi