![]() |
Drill Motors
Posted by Tom Vanderslice, Student on team #275, ORHS/AST/Hitachi, from Academy of Science and Technology and Hitachi.
Posted on 5/3/99 8:56 PM MST Ok...now that i have a couple drill motors to mess with and some spare time (hey...finals aren't for another 2 weeks ;)...anyone care to explain all that stuff about the drill motors to me? The stuff that was on here right as the comp. started this year about the backdrive pins (i think) and some other things. Or better yet, someone want to write one of those white papers about it? I would really like to have those things figured out before next year so that my team can use them to their full potential... Thanks, Tom Team 275 |
Re: Drill Motors
Posted by Tim Murray, Student on team #126, Gael Force, from Clinton High School and NYPRO inc..
Posted on 5/5/99 7:36 PM MST In Reply to: Drill Motors posted by Tom Vanderslice on 5/3/99 8:56 PM MST: I'm a little familiar with them but i couldn't pull them apart into a million pieces and put them back together again like i've seen people do before. i've done a little work with them but not much. I could and would love to help you out with them. Just tell me what you need and if I don't know it, i can consult one of my teachers who knows all about them. Tim |
Comment from Forum Historian...
Posted by Joe Johnson, Engineer on team #47, Chief Delphi, from Pontiac Central High School and Delphi Automotive Systems.
Posted on 5/5/99 8:15 PM MST In Reply to: Drill Motors posted by Tom Vanderslice on 5/3/99 8:56 PM MST: The following link has the info on how to take those nasty no-back pins out of those drill transmissions. Good Luck. Joe J. |
Thanks
Posted by Tom Vanderslice, Student on team #275, ORHS/AST/Hitachi, from Academy of Science and Technology and Hitachi.
Posted on 5/5/99 10:27 PM MST In Reply to: Comment from Forum Historian... posted by Joe Johnson on 5/5/99 8:15 PM MST: Thanks a bunch to both of you...the thread will be very helpful... now to see what happens when i actually try to do it... ;) I'm sure i'll come crawling back... ;) Thanks again, Tom Team 275 p.s. Joe...you seem pretty knowledgeable about the backdrive pins and stuff...you sure you don't want to write one of those white papers about it w/ pictures and stuff...that's what they are supposed to be for... right?...you don't have to give away the family farm...but (at the risk of sounding like i'm begging)...i'm a lot better with pictures... ;) oh well..i tried... ;) |
I'll add it to the list...
Posted by Joe Johnson, Engineer on team #47, Chief Delphi, from Pontiac Central High School and Delphi Automotive Systems.
Posted on 5/6/99 7:07 PM MST In Reply to: Thanks posted by Tom Vanderslice on 5/5/99 10:27 PM MST: Thanks for your vote of confidence. I am available if you get stuck. I have talked folks through editing config.sys files over the phone, I think helping you get your transmission spinning again would be a piece of cake. As to writing a white paper on the subject, I will add it to the list of white papers I want to write some day when I catch up on things a bit (I really do have such a list :-) If anyone else would like to do it, feel free. Joe J. P.S. my pager is 810.485.6176. telephone is 248.696.5672 good luck |
Re: I'll add it to the list...
Posted by Tom Vanderslice, Student on team #275, ORHS/AST/Hitachi, from Academy of Science and Technology and Hitachi.
Posted on 5/6/99 8:06 PM MST In Reply to: I'll add it to the list... posted by Joe Johnson on 5/6/99 7:07 PM MST: Thanks again... Tom V Team 275 p.s. dontcha just love lists of 'things to do someday when i have time'... i've got at least 3 or 4.... :) |
| All times are GMT -5. The time now is 08:26. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi