Chief Delphi - Transmission CAD

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)

- - Transmission CAD (http://www.chiefdelphi.com/forums/showthread.php?t=98098)

akoscielski3

02-11-2011 19:50

Transmission CAD

My team is designing a chassis (well i am), and i want to use transmissions that we already own. They are Gen2 AndyMark transmissions (AM-0076). However the CAD I downloaded from AndyMark are a different Part # (They have AM-0957). I need to find the CAD to AM-0076, because both transmissions are diffrent from each other. Does anybody already have these transmissions in CAD? Or know where to find them?

(We have already e-mail AndyMark, if we get a response i'll be sure to say it)

tim-tim

02-11-2011 20:18

Re: Transmission CAD

Try team1323.com they have a pretty extensive CAD Library.

You also may want to try searching FIRST Robotics CAD Libraries in google

R.C.	03-11-2011 00:58

Re: Transmission CAD

Quote:

Originally Posted by tim-tim (Post 1083650)

Try team1323.com they have a pretty extensive CAD Library.

You also may want to try searching FIRST Robotics CAD Libraries in google

The library should be getting a major facelift and about a grand total of about 600 total parts vs the 300 now. This won't be done till next year, but its something to look forward to!

-RC

akoscielski3

03-11-2011 07:43

Re: Transmission CAD

Quote:

Originally Posted by tim-tim (Post 1083650)

Try team1323.com they have a pretty extensive CAD Library.

Nope. No trannssmission.

Would it be possible to make the new version of side plates and use the old parts? I believe the only thing that changed were the placement of the holes and size of the transmission.

All times are GMT -5. The time now is 00:38.