Chief Delphi - 2CAN 2.0

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- CAN (http://www.chiefdelphi.com/forums/forumdisplay.php?f=185)

- - 2CAN 2.0 (http://www.chiefdelphi.com/forums/showthread.php?t=98621)

Mike Copioli

12-04-2011 03:22 PM

2CAN 2.0

1 Attachment(s)

2CAN 2.0 is now available. The new device will be replacing the orginal 2CAN. 2CAN 2.0 has an improved power connection, additional Flash and RAM, and enhanced ESD protection. Support will remain in place for both devices. Firmware and user manual updates to follow.

kccowan

01-11-2012 01:45 PM

Re: 2CAN 2.0

Do you have updated documentation on connecting the 2CAN to the new CRIO II? The new CRIO has only 1 ethernet port.

KC

Mike Copioli

01-11-2012 02:24 PM

Re: 2CAN 2.0

1 Attachment(s)

Quote:

Originally Posted by kccowan (Post 1102648)

Do you have updated documentation on connecting the 2CAN to the new CRIO II? The new CRIO has only 1 ethernet port.

KC

The documentation has not been updated to reflect using only a single port.

However using the method described to connect to port one will work fine. Just make sure the IP is on the same subnet 10.x.x.x as the port you are connecting to and that the 2CAN IP is unique, the firmware utility takes care of this for you. See the attached screen shot of the firmware utility.

Mike Copioli

01-13-2012 12:06 PM

Re: 2CAN 2.0

The 2CAN User Manual has been updated. Please visit:
http://www.crosstheroadelectronics.com/2CAN.htm

All times are GMT -5. The time now is 08:47 PM.