Engineering Safety Glasses Survey
 

Hey everyone!

Could you guys please fill out this survey for me? This is for my senior Engineering Class at my high school. It would be very appreciated. Thank you!

http://www.surveymonkey.com/s/X52KT9R

Re: Engineering Safety Glasses Survey
 

Survey done! My safety glass always impair my vision, either by condensation or scratches.

Re: Engineering Safety Glasses Survey
 

#5 - do you need to wear prescription glasses as well as safety glasses

I marked Yes, but this is really more of a Sometimes. Depends on whether I'm wearing contacts or not.

Re: Engineering Safety Glasses Survey
 

I did the same thing

Re: Engineering Safety Glasses Survey
 

Answered yes to the headaches but that is unrelated to safety glasses and more related to teams screaming "ROBOT!!!" in the pits and the overly loud music.

- Grumpy Old Man

Re: Engineering Safety Glasses Survey
 

Done, interesting survey. Oddly enough, I've caught myself wearing safety glasses even when I don't need them a bunch of times. Never remember having a headache.

You need a hug there, Champ?

(Also, aren't you like 23? Since when is that old? :P)

Re: Engineering Safety Glasses Survey
 

Makes me think that we should put a little bit more effort into finding the right glasses that are comfortable to wear, and taking care of them?

I've found some comfortable glasses that I take care of so they don't get scratched (I never leave them where students have access to them). They also have "cheater" bifocal lenses so I can see stuff close up, in my old age.

Re: Engineering Safety Glasses Survey
 

Done,

I suspect that most people responding to this thread probably bought and care for their own personal pair of safety glasses and would give different results that are different than the average team member that simply pulls a pair out of the bin that I suspect most teams have inside the door to their work area.

I know we populate that bin with CHEAP safety glasses that we ordered for around $1 a pair and they probably don't fit most people comfortably.

Re: Engineering Safety Glasses Survey
 

Was that last one a trick question?

I hope everyone knows that dropping your safety glasses while doing something requires safety glasses instantly makes you less safe, whether it is because you're distracted for a moment or just plain unprotected.

By the way, it is possible to polish scratches out of safety glasses (and other plastic products like it, like airplane windscreens), so don't write off a nice comfy pair just because you can't see through them yet.

Re: Engineering Safety Glasses Survey
 

Seconded.

I agree. Cheap safety glasses are junk. Spend a whole $10 on your own good pair, keep them clean and unscratched, and replace them when necessary. No headaches, you'll forget you are even wearing them-the best kind of safety.

My prescription safety glasses cost $300, and I trust my eyesight to them. Worth every penny. Do you have any idea how much a braille newspaper costs? ::safety::

Re: Engineering Safety Glasses Survey
 

I carry my pair in a belt pouch if they aren't on my head (in the proper orientation). The pouch protects them and can serve as a light cleaning cloth; then I can just whip them out on the way into the lab, and put them back in when I leave for more than a minute. They're quite comfy, and it beats the cheap ones in comfort. I only use those in an emergency--haven't used a pair regularly in my life. I've broken a pair; I replaced it right away.

Re: Engineering Safety Glasses Survey
 

My safety glasses are more grab-and-go (cheap ones that I took from my brother) and are defiantly showing their 5 years (maybe more) wear. Hopefully I'm adding some normalcy to the data.

Re: Engineering Safety Glasses Survey
 

My view of the value of safety glasses is slightly skewed since my company provides them to us free of charge. That being said I value the glasses sitting on my face properly and having full range of vision without fogging over their ability to get scratched since I can easily replace them.

Re: Engineering Safety Glasses Survey
 

The main issue I have with safety glasses is that, since I wear glasses and my nose doesn't have room for a second pair, my safety glasses rest on the frame of my normal glasses. Over time the additional weight on the nose pads begins to get quite irritating.

Re: Engineering Safety Glasses Survey
 

I have found that McMaster-Carr's 55035T3 are the best all around safety glasses. They are fog-free (really), easily go over prescription glasses, are comfortable with adjustable angle and ear pieces, and the frame can be reused on new lenses which can also be purchased (55035T92). I keep these for people who don't need safety glasses enough to justify safety prescription lenses.

Personally, I have a set of prescription safety glasses. They have a set of prescription lenses in a frame under a Uvex safety shield which can be replaced. Still the same number of surfaces to look through, but only one thing hanging on your head. The replacement shields are available on-line for a few dollars, but you still have to buy new prescription lenses whenever you get new (regular) glasses. The expense is justified by keeping the only two eyeballs I will ever have safe. There are just some things you don't skimp on!

Dr. Bob

Re: Engineering Safety Glasses Survey
 

I wear company supplied, prescription safety glasses. I just got a new pair that I have worn to an all day VEX tourney and an FLL tourney with no issues. My old ones use to give me headaches but these new ones are great (and a bit stylish).

Re: Engineering Safety Glasses Survey
 

My team has invested in about 30-40 of these for our glasses wearing population and while I can't tell if they're safer, they are definitely much more comfortable and impair my vision much less.

- Sunny G. and my poor peripheral vision.

Re: Engineering Safety Glasses Survey
 

If you wear glasses and can't afford prescription safety glasses, you can always use safety goggles. You can get a pretty nice pair at home-depot for 20 dollars. I have had these for a year and they are pretty scratch resistant, never fog on me, and are quite comfortable. If you can stand to wear these "stylish" bad boys in public then they are a perfect choice. :D

http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

Re: Engineering Safety Glasses Survey
 

I wanted to mark this I used to wear perscription safety glasses, then I got LASEK.

For those that wear prescription safeties you should add a question about visual distortion. The lenses are so thick up close I had distortion issues while wearing them. Other than that actual perscription safety glasses are way more comfortable.

Re: Engineering Safety Glasses Survey
 

The importance of comfortable, easy to wear safety glasses cannot be overstated. A nice comfortable pair of them will pay for themselves in the first hour of use. I have about a dozen pairs of various styles in my toolboxes. All of them are comfortable and make a full day of use trivial.

I want to direct everyone to one of my favorite websites: http://www.safetyglassesusa.com/
(Here's an example of a type we may buy, $3.90/pair when ordering over 36 pairs: http://www.safetyglassesusa.com/16505.html)

This site literally has hundreds of varieties of safety glasses. They have anything from the highest of high ends, to the lowest of low ends, and a huge selection in the middle. The reason I like them so much? Comfortable safety glasses can be had for CHEAP, probably around ~$2/pair. There's also volume pricing so if you order a bunch, you get a discount.

We've ordered our glasses for the past couple seasons from there. I've never had any issues with shipping, quality, etc. Highly recommended. Also, free shipping on orders >$100.


-Brando

Re: Engineering Safety Glasses Survey
 

Safety glasses are required for my job at all times on the factory floor. I have had good experience with Patriot brand over-the-glasses style safety glasses; I can wear them for 12+ hour shifts without discomfort. They do scratch, but if you take close care of them that isn't an issue. I usually don't realize that I'm wearing them at all.

I've used side-shields with my normal glasses, but only on occasions where safety glasses were obligatory but I didn't feel were necessary. Whenever there is the potential for flying bits of metal in the air, I will always put on a beefy pair of safety glasses that fully protect my eyes.

Re: Engineering Safety Glasses Survey
 

Thank you everyone for filling this survey out for my Engineering class!! I have more than 200 responses and its very beneficial to this project!!

Again,

THANK YOU VERY MUCH!!!

Re: Engineering Safety Glasses Survey
 

I assume that you are surveying the off-the-shelf, non-prescription safety glasses. Most large companies supply custom prescription or non-prescription safety glasses to their employees, indistinguishable from regular glasses (except for the side shields).

Re: Engineering Safety Glasses Survey
 

I do not wear prescription glasses, but like some of the other mentors, I find that as I get older I do need reading glasses at times. I just use regular drug store reading glasses, not true prescription glasses, but they can be a pain to wear along with standard safety glasses.

I tried using some safety glasses that were sold as reading safety glasses in a power that seemed good for use at normal working distances, but they were mostly sold with those little bifocal bumps that never really were in the right place. I also tried the stick on lenses with similar poor results. Working with electronics or mechanical devices is different from reading with a book on your lap, and I find I need to hold my head at odd angles to use these bi-focal type of safety glasses. After using them for a while I end up with a stiff neck.

What I really wanted was a pair of off the shelf safety reading glasses where the whole lens had the same level of magnification. I finally found what I wanted. The product is called Mag-saf and is available for about $15 from Amazon and other places. (No connection) They are plastic and probably scratch easily, but I have never had a problem because I always wear them with a strap so that I am never tempted to put them down where I shouldn't. Works for me. I think they are great.

Re: Engineering Safety Glasses Survey
 

A clip-on loupe magnifier could also help in similar situations. A quick search showed monocular versions for as low as 5 dollars and binocular versions for as low as $7.50, the higher-end models exceed $200.00, but those are probably overkill.
The cool thing about these is that many are somewhat adjustable.