Re: Free Bridgeport Style Knee Mill (SF Bay Area)
 

On the topic of VFDs, I just ordered a Teco EV series for a 3/4 HP lathe we have. It was about $140.

Anyhow, I'm surprised this mill isn't gone yet. My post shall be a free bump for the thread. I'd take it if we had the time and moving money and had not literally just finished moving and setting up a smaller mill. Also, we don't have the power for it yet (in any fashion, even with a VFD).

Re: Free Bridgeport Style Knee Mill (SF Bay Area)
 

It's the moving part that is turning out to be the problem, I think.

Re: Free Bridgeport Style Knee Mill (SF Bay Area)
 

We had a number of teams interested that didn't work out. We found a home for the mill today, so it's off the market now.

Re: Free Bridgeport Style Knee Mill (SF Bay Area)
 

Very glad to see it go to a good home, and not the scrappers.

Re: Free Bridgeport Style Knee Mill (SF Bay Area)
 

This post is over a year and a half old.

Re: Free Bridgeport Style Knee Mill (SF Bay Area)
 

And the mill was taken off the market a long time ago...

Re: Free Bridgeport Style Knee Mill (SF Bay Area)
 

We could use another mill.