Chief Delphi - Turning Off Command Alias Input

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Inventor (http://www.chiefdelphi.com/forums/forumdisplay.php?f=57)

- - Turning Off Command Alias Input (http://www.chiefdelphi.com/forums/showthread.php?t=99137)

Chickenonastick

30-12-2011 18:18

Turning Off Command Alias Input

1 Attachment(s)

I like using the hotkeys in Inventor, i.e. C to Constrain, M to Measure... But recently Inventor has been ignoring these hotkeys and rather brings up "Command Alias Input" in the lower display bar. Does anybody know what's going on?

404'd

30-12-2011 18:34

Re: Turning Off Command Alias Input

You can turn alias input completely off in the general tab of application options.
Tools > Aplication Options > General tab (2012)
Extra info here

Chickenonastick

31-12-2011 03:13

Re: Turning Off Command Alias Input

Although the picture shows a part file, this is happening in assembly mode as well.

inventor_phild

06-01-2012 08:00

Re: Turning Off Command Alias Input

I am currently in Manchester for the Kick Off and will send a reply later today / tomorrow. This may be an OS issue that I have seen with how Inventor reads the keyboard input. Speak with you soon.

msimon785

06-01-2012 10:13

Re: Turning Off Command Alias Input

The same thing was happening to me for a while with the 2011 build of Inventor. What it seems to mean is that there are multiple inputs with the same letter as you've entered. As in the example in the image, constraining would require you to press "C">"Enter". To change the commands or turn off alias input, go into your Application Options.

All times are GMT -5. The time now is 01:36.