Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   WestCoast Products: Launch (http://www.chiefdelphi.com/forums/showthread.php?t=99327)

R.C. 06-01-2012 22:56

WestCoast Products: Launch
 
CD,

This is a follow up to this post and the launch of a new company that is a legal vendor for the 2012 Season. The company is: WestCoast Products & Design LLC - WCP for short.

http://wcproducts.net

WCP aims to provide FIRST Teams, Hobbyists, and educators top notch quality products and designs for their projects. Along with items that are currently not available. By the end of week one bearings, chain, and hubs (Colson) will be available to purchase. By the end of week two, aluminum gears will be available to purchase.

If your team is interested in buying this season, please make an account on the site. If your team is interested in getting gears in certain sizes, let us know to help get certain sizes shipped out as soon as possible. I have gotten quite a lot of requests from teams that know certain sizes they'd want.

Some new items available:

-Bearings - Rubber Seal vs Shielded: http://wcproducts.net/bearings/
-Colson Hub - http://wcproducts.net/wcp-00052/
-Aluminum Gears: 35T and 48T Supershifter replacements along with other sizes: http://wcproducts.net/gears-20-dp/

Special Thanks to folks at AndyMark and Team 221 for being supportive, it’s amazing that FIRST vendors support one another. Also thanks to 254 (for the inspiration), EWCP, Adam Heard, Sean Cantrell, James Tonthat and other various individuals that gave me advice and helped/tested the items being sold now.

If you have any direct questions: please email here: rc@wcproducts.net

Thanks,

-RC

Andrew Lawrence 06-01-2012 22:59

Re: WCP: Launch
 
Woah! Looks awesome! Is what you have there all you're gonna sell at this point, or are you looking towards getting more stock?

Grim Tuesday 06-01-2012 23:04

Re: WCP: Launch
 
Very cool. I assume since you're called West Coast parts, you guys are on the west coast and won't much benefit us eastern teams much, but this will be a great resource for our brethren to the west!

Nick Lawrence 06-01-2012 23:05

Re: WCP: Launch
 
Congrats RC. Brb, ordering tons.

-Nick

thefro526 06-01-2012 23:06

Re: WCP: Launch
 
R.C. congrats man, it's awesome to see this finally happening.

Lemme get dem gears. :P

Andrew Lawrence 06-01-2012 23:08

Re: WCP: Launch
 
Do you do special orders? Like tooth double sprockets like the ones Andymark has, except 18 tooth instead of 15 tooth? :D

Gary.C 06-01-2012 23:11

Re: WCP: Launch
 
Quote:

Originally Posted by Grim Tuesday (Post 1097580)
Very cool. I assume since you're called West Coast parts, you guys are on the west coast and won't much benefit us eastern teams much, but this will be a great resource for our brethren to the west!

If you take a look at the shipping page we can ship all over the US & Canada. We could also do something for the teams outside of the US & Canada.

James Tonthat 06-01-2012 23:48

Re: WCP: Launch
 
Quote:

Originally Posted by SuperNerd256 (Post 1097577)
Woah! Looks awesome! Is what you have there all you're gonna sell at this point, or are you looking towards getting more stock?

Everything you see on the website, aluminum gears included, will be ready to ship by the end of week two.



~

Andrew Lawrence 06-01-2012 23:50

Re: WCP: Launch
 
When do you think you'll have pictures?

Also, will this (http://wcproducts.net/wcp-00004/) work in a CIMple Box gearbox? It says it works for tough boxes, but doesn't mention CIMple Boxes.

It would solve all of our problems if it could. :)

James Tonthat 07-01-2012 00:06

Re: WCP: Launch
 
Quote:

Originally Posted by SuperNerd256 (Post 1097621)
When do you think you'll have pictures?

Right now, the gears are off being shaped, we'll have a picture of them up by Thursday. After we get them on Thursday, we'll be sending them off for hard anodizing (Type III) with Teflon coating on them. If you want to learn a bit more about them, there's some info found here.

Here's a little teaser of them in blank form.




Quote:

Originally Posted by SuperNerd256 (Post 1097621)
Also, will this (http://wcproducts.net/wcp-00004/) work in a CIMple Box gearbox? It says it works for tough boxes, but doesn't mention CIMple Boxes.

It would solve all of our problems if it could. :)

The pinion gear you posted is a direct replacement of AndyMark's 14 tooth pinion. The CIMple Box uses a 12 tooth pinion. You might be getting it confused with the 56 tooth gear which will net you greater weight savings.

Andrew Lawrence 07-01-2012 00:11

Re: WCP: Launch
 
I'm trying to replace the pinion gear that goes into the gearbox. I want to use the 14 tooth pinion gear instead of the 12 tooth that you're supposed to use. Does that work that way, or will it not work?

James Tonthat 07-01-2012 00:16

Re: WCP: Launch
 
Quote:

Originally Posted by SuperNerd256 (Post 1097636)
I'm trying to replace the pinion gear that goes into the gearbox. I want to use the 14 tooth pinion gear instead of the 12 tooth that you're supposed to use. Does that work that way, or will it not work?

Unfortunately, because they are different sizes, you cannot fit a 14 tooth pinion into that space and have a good mesh. A solution would be to make custom gearbox plates.


Cheers,

Andrew Lawrence 07-01-2012 00:22

Re: WCP: Launch
 
Quote:

Originally Posted by James Tonthat (Post 1097640)
Either of these gears from AndyMark will work as a replacement pinion gear. 12x520 CIM Gear (am-0741) or CIM Gear, 12 tooth (am-0018). Although, the first one is the recommended replacement.


Cheers,

Thanks a bunch for your help, but I may not be being clear (I have a bad habit of doing so).

The ones you linked to in the post up there ^ were to 12 tooth pinion gears, the ones normally used to go on CIM motors into CIMple boxes. I want to use the 14 tooth pinion gear normally used on the toughbox to go on the CIM motor and into the CIMple Box, and I have no idea if that will work or not.

James Tonthat 07-01-2012 00:25

Re: WCP: Launch
 
Quote:

Originally Posted by SuperNerd256 (Post 1097643)
Thanks a bunch for your help, but I may not be being clear (I have a bad habit of doing so).

The ones you linked to in the post up there ^ were to 12 tooth pinion gears, the ones normally used to go on CIM motors into CIMple boxes. I want to use the 14 tooth pinion gear normally used on the toughbox to go on the CIM motor and into the CIMple Box, and I have no idea if that will work or not.

Send me an email at the email address in my signature or a private message.

Thanks.

Feroz1325 07-01-2012 00:31

Re: WCP: Launch
 
Rubber seals on all the bearings? Your getting ready for the water game too!! ;)


All times are GMT -5. The time now is 18:26.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi