Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)
-   -   Touching The Rim (http://www.chiefdelphi.com/forums/showthread.php?t=99369)

WireFreaks2156 07-01-2012 15:54

Touching The Rim
 
Are we allowed to touch the rim of the hoop? i might've read over it, but i haven't seen it so far.

cbeavers6790 07-01-2012 16:07

Re: Touching The Rim
 
Well you cant extend more than 14 inches from your robot perimeter and the fender is roughly39 inches deep and you cant Attatch to arena pieces so I would say no

GaryVoshol 07-01-2012 16:09

Re: Touching The Rim
 
Unless you are allowed to climb onto the Fender (something I doubt, see that thread) you wouldn't be able to reach the Hoop. You can only reach 14" outside the Frame Perimeter, less your Bumpers, so now you're down to ~10.5" reach. The Hoop is about 14.5" from the outside edge of the Fender.

Sean M 07-01-2012 16:10

Re: Touching The Rim
 
Quote:

Originally Posted by cbeavers6790 (Post 1098202)
Well you cant extend more than 14 inches from your robot perimeter and the fender is roughly39 inches deep and you cant Attatch to arena pieces so I would say no

Agreed,

Quote:

Originally Posted by GaryVoshol (Post 1098203)
Unless you are allowed to climb onto the Fender (something I doubt, see that thread) you wouldn't be able to reach the Hoop. You can only reach 14" outside the Frame Perimeter, less your Bumpers, so now you're down to ~10.5" reach. The Hoop is about 14.5" from the outside edge of the Fender.

and agreed. You would be short, as gone over in other threads, of being able to touch the Hoops and just "Dunk" balls. This is true from the front, the math comes out to give you at minimum several inches gap, and from the sides, in which you are even further away.


All times are GMT -5. The time now is 06:52.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi