Allowed to make two sets of bumpers?
 

Are you allowed to make two different sets of bumpers? As in, make one set of red bumpers and one set of blue bumpers?

According to
[R28] F. Each set of Bumpers (including any fasteners and/or structures that attach them to the Robot) must weigh no more than 20 lbs.

It does say "set" of bumpers. Does this imply that the red and blue sets can individually be up to 20 lbs each? Or that both bumper sets together can weigh up to 20lbs?

Re: Allowed to make two sets of bumpers?
 

I don't see why it wouldn't be allowed. I've seen teams do it before.

Re: Allowed to make two sets of bumpers?
 

The bumpers on the robot during a match are the only set counted. We had a red and a blue set last year that we swapped out.

Re: Allowed to make two sets of bumpers?
 

Yes, you may have two sets of bumpers, each up to 20 lbs. Both sets will be inspected, so both sets "count," although individually.

My initial read of the rules has it that you will need two sets of bumpers, as I do not see any provision for reversible or separate covers for the bumpers.

Re: Allowed to make two sets of bumpers?
 

For this to be valid reasoning, you would also need to determine whether the relevant parts of the rules (and interpretations thereof) have changed from year to year, and whether the teams who did it were found in violation of the rules.

Re: Allowed to make two sets of bumpers?
 

[R03], the weight rule, seems to imply that covers would be allowed, as covers are exempt from weight:

Re: Allowed to make two sets of bumpers?
 

Our team (1305) has been using interchangeable bumpers for the last few years and have never encountered a problem. My initial read through suggests that we will do this again this year.

Re: Allowed to make two sets of bumpers?
 

We used these bumpers last year, and they saved time between matches.

Re: Allowed to make two sets of bumpers?
 

Regarding the 20 pounds per set, is it even possible to make 20 pounds of bumpers? Can we soak the wood in mineral oil or something to add weight?

Re: Allowed to make two sets of bumpers?
 

It is possible to make 20lb bumpers. Both of out sets last year were 19.9 lbs each. We used 1/8" 1x2 aluminum angle for the construction.

Re: Allowed to make two sets of bumpers?
 

Highly recommend a single bumper with a cover for the opposite color. We also recommend quick disconnect attach for the bumber to allow maintenance to occur with as little disassemble reassemble time as possible.

Re: Allowed to make two sets of bumpers?
 

You're actually encouraged to. Two sets mean you can just switch them out, rather than reupholster them, or something. 174 does it every year, and we've never had a problem.