"Helix" robots in 2006/2009
 

Does anyone have any videos/pictures (videos are preferred) of robots from 2006/2009 that use a "helix" to get the balls up from the floor to the shooting mechanism?

Thanks!

PS: I already searched, both CD and Google.

Re: "Helix" robots in 2006/2009
 

1717 and 1771, 217, and 148 may be places to look. Though tornado was spinning the balls downward instead of up.
Edit: These are for 2009

Re: "Helix" robots in 2006/2009
 

Also in 2006 I believe that 469 had a helix for moving/storing the poof balls.

Re: "Helix" robots in 2006/2009
 

Remember only three balls max may be carried by a robot, and any more will get you a 3 point penalty each. Don't count on any complicated hopper or container being useful.

Re: "Helix" robots in 2006/2009
 

Exactly what I was about to say. Just an idea but you should think about designing the carrying mechanism so that it can only hold a maximum three at once. This way you limit the chances of increasing the opponents score.

Re: "Helix" robots in 2006/2009
 

Thanks for the robots, but aside from some robot videos, I can't find anything that clearly displays the helixes and how they work. Pics/videos are appreciated.

*And for all of those who will complain, YES I have searched this already.

Re: "Helix" robots in 2006/2009
 

Here is a video showing shooting and helix. I agree that the helix may not be the best design for this years game, but I don't want to limit your thinking.

Re: "Helix" robots in 2006/2009
 

There are many examples from 2006 in the Aim High:Behind the Design book. I have a copy, and will upload some of the pictures later tonight if I have time.

Re: "Helix" robots in 2006/2009
 

461 Did a helix in 2009. Feel free to browse the photos and information on our website.
Hope this helps,
-Duke

Re: "Helix" robots in 2006/2009
 

Tornado had to spin the moonrocks upward so that it could load up. Then it would release them in the other direction.

Attached are two CAD picks of 148s Archimedes screw from 2009. (Hid certain components to make it easier to view center.)

To answer your question of how they worked. You would have a center axis that would rotate 360 degrees. Attached to the center axis would either be fingers or brushes to move the balls towards the top. The spiral would raise in a clockwise fashion and the brushes/fingers would spin in the same direction.


Here are some other Archimedes screws from 2006/2009
1100-2009
233-2006
1771-2009

I agree with Martin. I don't think a screw is completely necessary as you can only possess 3 balls at a time.

Re: "Helix" robots in 2006/2009
 

Here's a video of the prototype test of ours, you should be able to find more videos from the same channel around the next few weeks after this was posted, that show it working in the final robot. Or maybe not, I don't remember.

http://www.youtube.com/watch?v=LlUgVpRckS8

yeah, this one is pretty good

http://www.youtube.com/watch?v=U6PchiI4bDQ

Re: "Helix" robots in 2006/2009
 

Check out the Robowranglers (#148) from 2009 on FRC Designs. Look at the picture, video, and CAD for ideas!

http://www.frc-designs.com/html/CAD_2009.html

Matt

Re: "Helix" robots in 2006/2009
 

Thanks all!

Re: "Helix" robots in 2006/2009
 

http://www.walpolerobotics.org/media...ild/week_2.htm

Not sure how long that link will stay up, we're creating a new website.

About a helix, its really not necessary to hold anywhere near the ~25 balls our robot could that year since you can only have three.

Re: "Helix" robots in 2006/2009
 

Tornado loaded the balls down not up. http://www.youtube.com/watch?v=aCVLZFyEI1Y

One simple solution a few teams used in 2009 was to use flexible plumbing pipe for their archimedes screw to get the helix they needed without all the parts.

http://www.chiefdelphi.com/forums/sh...ight=pic.+1100

Re: "Helix" robots in 2006/2009
 

My team did a helix design in Lunacy, and an open hopper system for Aim High.
The helix design gave us much better control over the balls, but keep in mind that was when we were expecting 10+ balls, this game there's a max of 3.

Here's a video of us testing the helix with a VERY simple construction that we got from another team. It was constructed with straight lines, much easier than bending material into an actual spiral.
This is what it looked like final construction!

Re: "Helix" robots in 2006/2009
 

177 also used a downward spiral in 2009.

http://www.chiefdelphi.com/media/photos/33112

http://www.chiefdelphi.com/media/photos/32626

Re: "Helix" robots in 2006/2009
 

Other teams to have a helix design in 2006 were 33 and 233. I am sure there are many others out there.

The aforementioned Deign Book for Aim High is also a great resource, I own it and recommend everyone buying one

Re: "Helix" robots in 2006/2009
 

Team 16 also had a helix design back in 2009

http://www.youtube.com/watch?v=ATN5G...eature=related

Re: "Helix" robots in 2006/2009
 

With being able to only handle 3 balls at most, I can't see how these designs would even be necessary for the game this year. A little overkill?

Re: "Helix" robots in 2006/2009
 

We (694) had a spiral hopper in 06. I'd suggest against it, it got us in the FIRST Robot Design Book for 06, but it had some issues, as well as being quite annoying to keep up.

You might have some luck with it. GL! :D

Re: "Helix" robots in 2006/2009
 

There's a lot of space and it's a great way to fit three balls compactly in terms of footprint (rather than height)