Chief Delphi - 2012 Electrical Diagrams

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - 2012 Electrical Diagrams (http://www.chiefdelphi.com/forums/showthread.php?t=99654)

Team 2148

09-01-2012 19:04

2012 Electrical Diagrams

What is the difference between the 12v electrical diagram and the 24v diagram?

Al Skierkiewicz

09-01-2012 19:40

Re: 2012 Electrical Diagrams

The difference lies in the use of 24 volt pneumatic valves and the associated wiring to the Crio solenoid module.

DonRotolo

09-01-2012 22:16

Re: 2012 Electrical Diagrams

To elaborate: If you are NOT using any Pneumatic Solenoid Valves that operate on 24 Volts, use the 12 V diagram. Otherwise, the 24 V diagram shows you how to supply those valves with 24 V legally. Note that they do make solenoid valves that operate on 12 V.

Mike Martus

10-01-2012 08:09

Re: 2012 Electrical Diagrams

And for our readers where specifically are these diagrams? I have looked on the FIRST site and could not find them.

sam_who

10-01-2012 08:17

Re: 2012 Electrical Diagrams

http://www.usfirst.org/roboticsprogr...rts-electrical

All times are GMT -5. The time now is 05:25.