Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Poll: Wide or Narrow Chassis? (http://www.chiefdelphi.com/forums/showthread.php?t=99750)

Hallry 10-01-2012 19:09

Poll: Wide or Narrow Chassis?
 
Another day of planning, another poll.

Today, one of our team's main decisions was what kind of chassis we were going to build: a wide or narrow base. While we did mostly agree upon a narrow chassis, we figured it might be worth trying out a quick prototype of each, and see which handles better.

What kind of chassis is your team building? Why? What do you think the pros/cons are?

aheg1220 10-01-2012 20:11

Re: Poll: Wide or Narrow Chassis?
 
Don't forget that a wide chassis will be more prone to tipping while going over the bump. The upside is that you won't have a problem turning if you decide to use only 4 wheels.

A narrow chassis will be more stable going over the bump, but you'll have to use a 6 or 8 wheeled drive in order to facilitate turning.

Ninja_Bait 10-01-2012 20:17

Re: Poll: Wide or Narrow Chassis?
 
I think in terms of trade-offs:

Wide gives you a wider acquirer, but it makes it harder to stay upright when you navigate the obstacles.

Narrow limits the acquirer but gives you better balance.

With only 18 balls max on the field, and a three-ball limit, I think the importance of a wide acquirer will be lessened. I doubt teams will have many opportunities to pick up more than one ball at a time.

Answer? Narrow robot.

biancs15 10-01-2012 20:27

Re: Poll: Wide or Narrow Chassis?
 
On the pro side for narrow drivetrains, it will be much easier to fit it onto the ramp at the end of the match. During eliminations, these extra 20 points are so very key. That is 7 balls scored on the top hoop, 10 balls scored in the mid hoops and 20 balls on the low hoop. That is literally half of the match making up for the extra time it takes to load 3 onto the ramp. It is IMPOSSIBLE to have 3 "long" robots balanced on the ramp. That is not going to happen.

I disagree with the point of 18 balls being a small enough number that we will only be encountering one at a time. Even if 6 balls had just been scored (1 per team), there are 12 balls on the field. If you give each side 6 balls randomly placed on a 27 by 27 foot section of the court the randomness could allow for even 3 or 4 balls to come together.

- Austin

DonRotolo 10-01-2012 21:19

Re: Poll: Wide or Narrow Chassis?
 
Quote:

Originally Posted by biancs15 (Post 1101995)
It is IMPOSSIBLE to have 3 "long" robots balanced on the ramp. That is not going to happen.

Impossible is such a strong word.

I have 3 robots, all 6-wheel low center drive at 119 pounds:
Bot 1: Heavier in front by 10 pounds, 21" from center wheel to edge of heavy end bumper
Bot 2: Perfectly balanced, 44" long
Bot 3: Heavier in rear by 10 pounds, 21" from center wheel to edge of heavy end bumper.

The bots are lined up on the 88" ramp Bot 1 (heavy end in), Bot 2 (in the middle), Bot 3 (also heavy end in). Bot 1 takes up 21.5", the center wheel is 0.5" from the edge of the ramp. Bot 2 takes up 44 inches. Bot 3 is like Bot 1.

21.5 + 44 + 21.5 = 87 inches. They fit.

Oh, and Bot 2 turned sideways on the ramp before Bots 1 and 3 positioned themselves, now you could fit Andy Baker on there too.

Oh, and all three bots are really 37 inches long, not 38, so there's extra room.

Still Impossible?

Sconrad 10-01-2012 21:56

Re: Poll: Wide or Narrow Chassis?
 
Quote:

Originally Posted by DonRotolo (Post 1102055)
Impossible is such a strong word.

I have 3 robots, all 6-wheel low center drive at 119 pounds:
Bot 1: Heavier in front by 10 pounds, 21" from center wheel to edge of heavy end bumper
Bot 2: Perfectly balanced, 44" long
Bot 3: Heavier in rear by 10 pounds, 21" from center wheel to edge of heavy end bumper.

The bots are lined up on the 88" ramp Bot 1 (heavy end in), Bot 2 (in the middle), Bot 3 (also heavy end in). Bot 1 takes up 21.5", the center wheel is 0.5" from the edge of the ramp. Bot 2 takes up 44 inches. Bot 3 is like Bot 1.

21.5 + 44 + 21.5 = 87 inches. They fit.

Oh, and Bot 2 turned sideways on the ramp before Bots 1 and 3 positioned themselves, now you could fit Andy Baker on there too.

Oh, and all three bots are really 37 inches long, not 38, so there's extra room.

Still Impossible?

I'm not sure I understand your math. Are you proposing that Bots 1 and 3 have their lighter side hanging off of the side of the ramp? If Bot 1 and 3 take 21.5 inches, than they can't be 38 inches long and not have some of their chassis over the edge of the bridge. While they would still stay on the bridge I think (the center of gravity is above the bridge), 37 inches per bot would not give any extra space, just some more breathing room. Even if you assume that Bot 2 followed the length restrictions and fits itself in 38 inches, or 28 inches if it turned sideways first, you are still just giving yourself a couple more inches from falling. While I agree that balancing a ramp of three 37" robots is technically possible, the situation you outlined is so specific and difficult to accomplish without pushing a robot off the ramp, that I don't think the possibility holds any probability. I could just be misinterpreting the situation you are outlining, if so, please correct me.

To quote Stephen J Gould, "I suppose that apples might start to rise tomorrow, but the possibility does not merit equal time in physics classrooms." While it is possible to balance 3 long robots on a ramp, I would guess that you can safely assume that you have your chances of a three-robot bridge drastically reduced to the point of extreme improbability with three long robots.

That being said, I personally hesitate to support a wide robot chassis for reasons of tippability.

TheOtherGuy 10-01-2012 23:09

Re: Poll: Wide or Narrow Chassis?
 
Quote:

Originally Posted by DonRotolo (Post 1102055)
Impossible is such a strong word.

I have 3 robots, all 6-wheel low center drive at 119 pounds:
Bot 1: Heavier in front by 10 pounds, 21" from center wheel to edge of heavy end bumper
Bot 2: Perfectly balanced, 44" long
Bot 3: Heavier in rear by 10 pounds, 21" from center wheel to edge of heavy end bumper.

The bots are lined up on the 88" ramp Bot 1 (heavy end in), Bot 2 (in the middle), Bot 3 (also heavy end in). Bot 1 takes up 21.5", the center wheel is 0.5" from the edge of the ramp. Bot 2 takes up 44 inches. Bot 3 is like Bot 1.

21.5 + 44 + 21.5 = 87 inches. They fit.

Oh, and Bot 2 turned sideways on the ramp before Bots 1 and 3 positioned themselves, now you could fit Andy Baker on there too.

Oh, and all three bots are really 37 inches long, not 38, so there's extra room.

Still Impossible?

It is almost surely not going to happen ;)

Tristan Lall 11-01-2012 02:45

Re: Poll: Wide or Narrow Chassis?
 
Quote:

Originally Posted by TheOtherGuy (Post 1102169)
It is almost surely not going to happen ;)

Bah. Line them up across the edge of the bridge, and I'll push them up sideways with my robot.

3v3rnoob 11-01-2012 03:21

Re: Poll: Wide or Narrow Chassis?
 
Of course! And why CAN'T all three robots go on the long way? Part of the two on the ends can hang off and still balance right? Just don't push too much or my robot on the end will bet smashed UP![/sarcasm]

But in all seriousness, it's not very likely that all three robots will fit on the ramp if they all want to get on long-ways. Then again, that's what mecanum wheels are for, right?

soxfan269 11-01-2012 07:33

Re: Poll: Wide or Narrow Chassis?
 
Quote:

Originally Posted by 3v3rnoob (Post 1102400)
Of course! And why CAN'T all three robots go on the long way? Part of the two on the ends can hang off and still balance right? Just don't push too much or my robot on the end will bet smashed UP![/sarcasm]

But in all seriousness, it's not very likely that all three robots will fit on the ramp if they all want to get on long-ways. Then again, that's what mecanum wheels are for, right?


Our team came to the conclusion that if you ever see three on a ramp that will be the only time you see it. I doubt from calculations we've made that you will ever see 3 robots on at once. I don't think any team will volunteer their robot to be the one hanging off the edge, there's just too much risk involved. To me a wide drive train seems the most logical. After playing many, many matches on Catalyst I can say that there is never a shortage of balls on the ground. Because of that I believe that there is an advantage to having a wider ball collecting zone.
As far as the bump goes, I don't see any major advantage that going over the bump would give you. I can't see a robot crossing the mid field more than twice, and probably more often only once. The only reason to go onto your opponents side would be to guard or to pass balls. If you're doing that then you're probably going to stay at that end most of the game. The only reason you might cross again would be for end game.

I can't see stability being an issue. If all you're doing is going over 1-2 times a game then you can cross the bridge without it being a hindrance to you. On a narrow robot design you have such little space to line up the ball to the collector that it might hurt you more in the long run, than going over the bridge twice would. Catalyst has been very helpful in identifying problems that I hadn't even thought about. I highly suggest anyone trying to decide between a narrow or wide chasis to try out any chasis available on Catalyst. Last time I checked it will only let you use a narrow chasis, but atleast then you may be able to see the difficulty that the narrow collector can cause.

ThaineP 11-01-2012 08:11

Re: Poll: Wide or Narrow Chassis?
 
My team has Mecanums on our bot this year, so it's kind of irrelevant which end goes first. However, we have a ball intake on one narrow end, so I guess that's the front.

Jared Russell 11-01-2012 08:17

Re: Poll: Wide or Narrow Chassis?
 
To quote one FIRST Senior Mentor:

"If the robot don't fit, you must acquit" (or in this case, not pick that team to be a part of your eliminations alliance)

Hawiian Cadder 11-01-2012 10:24

Re: Poll: Wide or Narrow Chassis?
 
I think we will assuredly see a triple robot balance. what about robots driving onto other robots, I could see a robot designed entirely to hold another robot, and to allow it to climb on with a ramp working very well. If the first robot had a 14 inch wide ball manipulator up front, with a 14 inch extension there is even enough room for a second robot on top while still having a working ball scoring system. A low level of stall against some support on the first robot would enable it to stay on fairly well, and score 2 robots in the footprint (slightly more really) of one.

karomata 11-01-2012 10:42

Re: Poll: Wide or Narrow Chassis?
 
My team, 1511, is heading toward a narrow drive, but I am still in support of a wide drive because it can collect balls faster and can arrange itself on the bridge easier and taking less time.

Andrew Lawrence 11-01-2012 10:45

Re: Poll: Wide or Narrow Chassis?
 
I see no need to pick up balls faster, since you can only hold 3 balls at a time. A narrow chassis will be a lot more sturdier, and will be better to go over the bumps/bridges in the center. A wide chassis can get more balls at a time, however like I said with only 3 balls maximum, picking them up fast won't be very useful.


All times are GMT -5. The time now is 06:17.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi