Chief Delphi - Error Deploying JAVA

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Java (http://www.chiefdelphi.com/forums/forumdisplay.php?f=184)

- - Error Deploying JAVA (http://www.chiefdelphi.com/forums/showthread.php?t=99875)

swootton

13-01-2012 21:45

Re: Error Deploying JAVA

This is the sample code suggested to use in the getting started package. I'll check the lights in the AM. When we enable it nothing happens. We did not do anything with the DB37, should we have?

bdbayes

13-01-2012 21:52

Re: Error Deploying JAVA

Quote:

DB37 Rework
Please note that many, if not all, of the DB37 cables shipped in the 2012 Kickoff Kits were assembled incorrectly. We have posted more information about the issue as well as instructions to fix the cables here.

Click Here for instructions

swootton

14-01-2012 10:36

Re: Error Deploying JAVA

Ok, we managed to get the problem fixed. The Crio is now working and the robot can now move in tank drive. The fix for the DB37 cable was all that we needed.
Thank you all for the help. :7

bdbayes

14-01-2012 10:38

Glad to hear you were able to fix it.

linuxman

26-01-2012 22:57

Re: Error Deploying JAVA

We had had the same error as mentioned in this thread, We took the advice and checked our cable and there was an issue, but that didn't solve that. We are running off of Java on Linux. We also reimaged our cRio to be compiled with LabView and the code compiled onto the robot. The java compiler freezing hasn't changed whether the cable was attached or not.

derekwhite

27-01-2012 10:11

Re: Error Deploying JAVA

Sorry, there's not enough information to go on. Can you provide a full log of what you're seeing? In fact I'd suggest starting a new thread since your problem seems to be different than the OP.

Good luck!

touchdownjesus4

27-01-2012 15:29

Re: Error Deploying JAVA

We are having the exact same problem as the OP, hopefully fixing the cable should resolve the issue.

Just to be clear, when I hit the green button in netbeans it should run all the way through without this error after we fix the cable right?

BradAMiller

27-01-2012 16:04

Re: Error Deploying JAVA

Quote:

Originally Posted by touchdownjesus4 (Post 1114742)

When you hit the green button it builds your program, downloads it to the cRIO (using built-in FTP), then reboots the cRIO so your program comes up running.

Fixing the cable will address problems after the program starts. It won't make download properly if it wasn't doing that before.

Brad

All times are GMT -5. The time now is 12:25.

Page 2 of 2

Show 100 post(s) from this thread on one page