Chief Delphi - Powering the 2CAN 2.0

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Powering the 2CAN 2.0 (http://www.chiefdelphi.com/forums/showthread.php?t=99877)

wre136

01-11-2012 08:40 PM

Powering the 2CAN 2.0

Does anyone know where on the power distribution board you would connect the 2CAN 2.0 module to?

Mike Copioli

01-11-2012 09:19 PM

Re: Powering the 2CAN 2.0

Quote:

Originally Posted by wre136 (Post 1103001)

Does anyone know where on the power distribution board you would connect the 2CAN 2.0 module to?

The 2CAN must be powered by one of the 12volt breakers, 20 amp is fine. The 2CAN will operate at up to 24 volts but connecting to the 24 volt supply is not legal.

All times are GMT -5. The time now is 08:47 PM.