Re: Fisher Price 00968-9013 motor
 

As far as I remember (and is supported by the limited past info I have access to), the 00801-0673 is the FP with greater max power (about 100W higher than the 9012 and 9015). I have no info on the -9013's at all, though.

Re: Fisher Price 00968-9013 motor
 

Does anyone know when the 0673 will be back in stock?

Re: Fisher Price 00968-9013 motor
 

The 0673 also spins with a higher free speed than the 9012 FP - handy for a flywheel...

Re: Fisher Price 00968-9013 motor
 

All,

To follow up with my investigation ...

The 00801-0673 is the motor from my post in the following thread from 2002 (man, I don't feel that old). I am certain that this motor has the specs from the chart in the thread below. I suspect any other specs as I received those straight from the actual manufacturer.


http://www.chiefdelphi.com/forums/sh...ght=00801-0673

Anyway, we still have a bunch of these motors sealed up in almost new condition.

Paul

Re: Fisher Price 00968-9013 motor
 

FWIW, comparing to http://www.usfirst.org/sites/default...torInfo4.1.pdf

• stall oz-in 72.8 vs 75.4
  
  
• free rpm 20236 vs 20770
  
  
• max watts 273.7 vs 291.6
  
  
• stall amps 109.4 vs 108.7
  
  
• free amps 1.86 vs 0.82

very close, but still different (so probably from a different source)

I wonder where FRC got their specs. Anyone know?

Re: Fisher Price 00968-9013 motor
 

Are there vendors other than AndyMark for the Fisher Price motors? AM is out of stock and backordered, and I cannot find another distributor.

Re: Fisher Price 00968-9013 motor
 

The KoP Checklist pictures a -9013 motor with a 13 tooth pinion. But the text in the same checklist line-item (see the thumbnail in Ether's earlier post) says it is 19 teeth.

Did some teams receive -9013 motors with 19 tooth pinions? Or is this just an error? My team received two -9013 motors with 13 tooth pinions.

I think the 2011 KoP had FP motors with 19 tooth pinions.