Quote:
Originally Posted by gvarndell
I've read the thread again and decided:
1) nolanpoe and the OP are one and the same
2) the problem reported in the first post is the same problem shown in post #6 -- but less clearly articulated.
|
Sorry about the confusion. Clear articulation of my ideas is something I strive for but never achieve.
Also, #4 has a screenshot of the problem described in #1. Basically the problem was that there was no field for me to input an IP address into...
#6 is actually describing wind river working (AFAIK... I was able to connect and download code when it looked like this).
One more thing: I've run into some problems with wind river in VirtualBox. The first day it worked perfectly. Next morning, not so much. It was complaining about not finding a specific dll file. Reinstall fixed it. I'll edit this post later with any more information I discover today.
Quote:
Originally Posted by gvarndell
You thought that because the dialog had empty fields Workbench wasn't working?
Your team members who had WR Workbench installed last year already had target connections defined from last year -- so the fields are not empty.
Your team members who did not have WRWB installed last year did not have any previously defined target connections -- empty fields.
Sorry you had to waste so much time, but you've learned something important -- read the instructions.
Please follow the very nicely detailed instructions posted here...
http://www.chiefdelphi.com/forums/sh...ad.php?t=87598 |
If only... Unfortunately, none of our team members participated last year. 1717 is a rookie group every year. We rely on mentors and alumni for detailed information about past years, and none of the ones that I asked was able to figure it out.
Thanks a bunch for all of the help. CD is pretty much the most helpful forum I've ever seen.
